gs650G banjo sizes?

[spokexx]

Im changing my front brake lines over to Goodridge steel lines. Im going with the DOT universal lines and the chrome banjo fittings and bolts. Im also going with 2 lines straight off the mc down to each caliper. But what size banjo bolts (double at the mc and singles down at the calipers) do i use? (length, diameter, thread)

thanks, drew

[Bribird]

hey Drew, I am pretty sure they are 14mm fine thread. I would consider going with HEL lines. They offer like 3 different hose routing choices and come with all the hardware for the lines... Plus all there banjo bolts are made in house out of a high strength stainless.

http://www.helusa.com/

I have them installed on my bike and they look and work great.

http://www.helusa.com/store/product_info.php?products_id=7878

[bwringer]

They are 10mm thread diameter X 1mm pitch.

You probably don't need new banjo bolts. Just use the double from the original splitter.

[spokexx]

They are 10mm thread diameter X 1mm pitch.

You probably don't need new banjo bolts. Just use the double from the original splitter.

i didnt even know there was a double bolt tucked up in there on the original splitter. hmmm

thanks for the help, boys. I will look into those hel lines also.

[Nessism]

HEL lines are significantly more money than building your own from Earl's components...http://www.thegsresources.com/_forum...d.php?t=114521