Announcement

Collapse
No announcement yet.

Different methods of wheel alignment

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Different methods of wheel alignment

    So far I've seen the string method & Matchless's variation using a laser level.

    Anyone got any other methods worth looking at?

    Dan
    1980 GS1000G - Sold
    1978 GS1000E - Finished!
    1980 GS550E - Fixed & given to a friend
    1983 GS750ES Special - Sold
    2009 KLR 650 - Sold - gone to TX!
    1982 GS1100G - Rebuilt and finished. - Sold
    2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!

    www.parasiticsanalytics.com

    TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/

    #2
    I used a variation on the laser method for mine, but others have very strong opinions about it, so.. hehe



    I tried the string method the other day, but found it harder to juggle all the variables.

    Good luck!

    Comment


      #3
      The string method works a bit better if you can somehow balance the bike without using the centerstand to give you more room to work.

      This method can also benefit from not using the centerstand:
      Instead of using string, go to Lowe's, Home Depot, wherever, see if you can find two 1x2s that are 8' long and STRAIGHT.
      Clamp them as high as you can on the rear tire, you can easily see how they align on the front tire.
      You can also use angle iron or angle aluminum, but I was trying to keep the cost down.

      .
      sigpic
      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
      #2 son: 1980 GS1000G
      Family Portrait
      Siblings and Spouses
      Mom's first ride
      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
      (Click on my username in the upper-left corner for e-mail info.)

      Comment


        #4
        Let me preface this by saying I just went through this exercise and evaluated various approaches from an systems engineering perspective (as a paid professional with about 30 years doing this sort of thing). In addition I can say, I was somewhat amused by the string method as it appeared "Mickey mouse" to say the least. So after having evaluated the various alternatives :
        • laser methods (with and without special attachments
        • String Methods
        • Methods with tires mounted on wheels
        • Wheel mounts alone
        Here is a summary of my observations/conclusions.

        The first thing to consider is what wheel alignment accuracy are we trying to achieve and then we can perhaps determine what measurement accuracy we will need to achieve the required alignment accuracy. Stated another way, we need to recognize that it is difficult to determine where the center of your tires are and therefore there is a limit to how well you need to know this in the first place.

        The various Suzuki manuals quote runnout numbers of approximately 1.0 mm for their factory cast wheels , but a cast wheel that is relatively straight should be close to +/-0.2mm of maximum runout. You can verify this pretty easily with a dial indicator but the wheel runout for a straight wheel is much better than the tire. So the best form of frame alignment would be to use the wheels as reference points and project lines from the rear wheel to the front wheel using either the wheel lip or other point on the rim. An adequate form of tire alignment maybe to just use the tire as that is in fact what runs on the road. Bottom line for overall alignment accuracy is and as has been discussed before alignment to 1mm over 6 foot is a noble goal but even that is not necessary and for a bias ply, high profile tire on a GS 2-5 mm may be unnoticeable I have seen much worse and be tolerable.

        If you can account for wheel run out then you may be able to achieve sub 1mm accuracy as measured over the length of the bike; however most methods using straight edges use the sidewall of the tire as reference. Sidewall run out can be significant and is much worse for a high profile tire. For example a 130/90-17 will be worse that a low profile 180/55-17 which will follow the rim much better as there is simply less rubber between the rim and when a straight edge will leave the side wall.

        At least one commercial product I reviewed used a special clamping device that was able to reference repeatably off of the rim without using the tire sidewall. Of course it also used a laser which I will discuss later.

        As far as straight edges, I built one out of oriented strand board glued together with a long section of aluminum angle iron screwed to it. I used this during my frame alignment activities . I calibrated the straight edge to about 1mm in 6 foot. (using the string method).

        While a laser is more straight than a string (strings bend with gravity along the vertical ), the laser is diffuse and at 6 foot the tolerance is at best 1-2 mm of uncertainty as to where the center (or other reference is of the laser). On the other hand with a string, I'm sure I was able to any errors well below 1mm because I could very accurately determine the string departure from the rear wheel as well as accurately measure the string relative wheel (I would estimate the tolerance to be no worse than +/-0.2 mm per side). Therefore the maximum error is approx +/-0.3mm total.

        This is achieved using a thin string and monitoring how the string vibrates as it comes in contact with the sidewall. In contrast my straight edge I built was about 1mm and very difficult to determine when it was aligned with the rear tire which could cause much larger error.

        My conclusion from all this was that:
        • for a low profile radial rear tire, the tire side wall provided a good reference to project forward to the front tire.
        • A string at 6 foot is easier to use in determining it's relation ship to the rear tire than a diffuse laser (+/- 1 to 2mm for a laser v.s. +/- 0.2mm for a string).
        • 1mm alignment accuracy is all that is needed
        • A string alignment is easy to achieve the stated 1mm; by using a string bounce technique along the side wall.
        • The laser you have to struggle to figure out it's distance from the rear tire or to get an offset from a reference point on the front wheel/tire.
        Summary:
        You maybe able to buy something that costs more, but if executed correctly I doubt you can do any better than an thin string toward achieving sub 1mm measurement accuracy.

        Pos

        Comment


          #5
          Originally posted by posplayr View Post
          Let me preface this by saying I just went through this exercise and evaluated various approaches from an systems engineering perspective (as a paid professional with about 30 years doing this sort of thing). In addition I can say, I was somewhat amused by the string method as it appeared "Mickey mouse" to say the least.

          (skip to summary)

          Summary:
          You maybe able to buy something that costs more, but if executed correctly I doubt you can do any better than an thin string toward achieving sub 1mm measurement accuracy.

          Pos
          I agree with Jim, the string method is easy and it works.
          Ed

          To measure is to know.

          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

          Comment


            #6
            Originally posted by Nessism View Post
            I agree with Jim, the string method is easy and it works.
            I have just fitted a new rear tire to my GS750E, and have used the string method. I really went to town and took every measurement i could to ensure a really accurate alignment.

            Now here's my tip.

            Once i was sure of the alignment, i used my vernier caliper depth function to measure from each wheel adjuster bolt head face, to the adjuster body. My brake side measurment was 35 Thou (english) more than the chain side.

            I can now ensure very accurate wheel alignment every time the chain needs adjusting, or the wheel comes out, just by making sure the brake side adjusting bolt head measures 35 Thou out more than the other.

            Footy.

            Comment


              #7
              What I find interesting is we use none of those for the drag bike....of course the swing arm is fixed, so maybe that is part of the deal...

              A lot of the guys and us, use a home made tool that measures the distance from the center of the pivot bolt to the center of the rear axle...
              That way the wheel is straight in relationship to the rear fork...

              Of course from there we tweak it a little to achieve a straight launch under power...

              My question than becomes....will this work well on a street bike?
              Because that is what I use and it seems fine.

              Can't wait for an answer...off to the track in a couple...check back tonight....
              Bob T. ~~ Play the GSR weekly photo game: Pic of Week Game
              '83 GS1100E ~ '24 Triumph Speed 400 ~ '01 TRIUMPH TT600 ~ '67 HONDA CUB

              Comment


                #8
                Originally posted by Baatfam View Post
                What I find interesting is we use none of those for the drag bike....of course the swing arm is fixed, so maybe that is part of the deal...

                A lot of the guys and us, use a home made tool that measures the distance from the center of the pivot bolt to the center of the rear axle...
                That way the wheel is straight in relationship to the rear fork...

                Of course from there we tweak it a little to achieve a straight launch under power...

                My question than becomes....will this work well on a street bike?
                Because that is what I use and it seems fine.

                Can't wait for an answer...off to the track in a couple...check back tonight....
                I Would like to see that device, but from your description " pivot center to axle center" not sure if you mean axial center or mid point. Regardless, this doesnt take into acount any other issues such as frame tweek. Without knowing much more, a dragster is not so worried about front wheel alignment but rather drive wheel alignment in the frame.

                The laser and string methods are directly measuring one wheel with respect to the other for both alignment (parallel) and being on center (no lateral offset).

                Comment


                  #9
                  Originally posted by Footy. View Post
                  I have just fitted a new rear tire to my GS750E, and have used the string method. I really went to town and took every measurement i could to ensure a really accurate alignment.

                  Now here's my tip.

                  Once i was sure of the alignment, i used my vernier caliper depth function to measure from each wheel adjuster bolt head face, to the adjuster body. My brake side measurment was 35 Thou (english) more than the chain side.

                  I can now ensure very accurate wheel alignment every time the chain needs adjusting, or the wheel comes out, just by making sure the brake side adjusting bolt head measures 35 Thou out more than the other.

                  Footy.
                  EDITED: After a little more thought I over did this. The relevant ratio is the distance between adjuster nuts (say 12" v.s. the wheel base 60") there is no additional factor of 2. Ratios edited below.

                  I was posting this yesterday and the mahine locked up before I could hit the send button.

                  The relationship between rear adjuster bolt and front wheel movement is approximately 5:1 for a GS (Ratio = wheel base /(swing arm adjuster spread) = 60"/12"=5.


                  So depending upon the pitch of the adjuster bolt you have it could be:

                  1.25mm pitch x 5 = 6.25mm/adjuster turn
                  1.0 mm pitch x 5 = 5mm/adjuster turn

                  So if you want to be within 1 mm alignment (wheel to wheel) and you have a hex head adjuster

                  for 1.25mm adjuster pitch, 6/6.25 of Hex flat to go 1mm at front wheel.
                  for 1.00mm adjuster pitch, 6/5 of Hex flat to go 1mm at front wheel

                  (basically 1 hex flat is approx 1mm)

                  So after doing the first alignment and adjusting your chain, keep track of the adjuster Hex flats will keep you in alignment (transfer the same turns you adjusted for the chain to the right side) . This will work even if you forget your caliper at home.
                  Last edited by posplayr; 10-11-2009, 01:59 PM. Reason: Correct the length ratio relationships

                  Comment


                    #10
                    Bump; I edited this post
                    Originally posted by posplayr View Post
                    EDITED: After a little more thought I over did this. The relevant ratio is the distance between adjuster nuts (say 12" v.s. the wheel base 60") there is no additional factor of 2. Ratios edited below.

                    I was posting this yesterday and the mahine locked up before I could hit the send button.

                    The relationship between rear adjuster bolt and front wheel movement is approximately 5:1 for a GS (Ratio = wheel base /(swing arm adjuster spread) = 60"/12"=5.


                    So depending upon the pitch of the adjuster bolt you have it could be:

                    1.25mm pitch x 5 = 6.25mm/adjuster turn
                    1.0 mm pitch x 5 = 5mm/adjuster turn

                    So if you want to be within 1 mm alignment (wheel to wheel) and you have a hex head adjuster

                    for 1.25mm adjuster pitch, 6/6.25 of Hex flat to go 1mm at front wheel.
                    for 1.00mm adjuster pitch, 6/5 of Hex flat to go 1mm at front wheel

                    (basically 1 hex flat is approx 1mm)

                    So after doing the first alignment and adjusting your chain, keep track of the adjuster Hex flats will keep you in alignment (transfer the same turns you adjusted for the chain to the right side) . This will work even if you forget your caliper at home.

                    Comment


                      #11
                      Originally posted by posplayr View Post
                      Bump; I edited this post
                      Yes i agree, keeping account of the "flats" achives the same accuracy after your initial alignment. This is the easiest way to adjust chain tension.

                      But when we remove our rear wheels for any reason, we have to back the adjusters right off to allow them to swing down so the wheel will go right up forward to peel the chain off. Keeping account of how many adjuster turns this means will be a real pain.

                      I know now that it doesn't matter on my bike how far in and out the bolts are, as long as the brake side adjuster bolt head ends up 35 Thou further out. Then i will always retain the original (Hard work to do) correct alignment, even after the wheels been out.

                      Regards.

                      Footy.

                      Comment


                        #12
                        Originally posted by Footy. View Post
                        But when we remove our rear wheels for any reason, we have to back the adjusters right off to allow them to swing down so the wheel will go right up forward to peel the chain off. Keeping account of how many adjuster turns this means will be a real pain.

                        .
                        Footy,

                        OK I'll keep that in mind next time I have to pull the wheel.

                        Swingarm hashmarks have had a bad wrap for being "notoriously" inaccurate; the fact that 1 turn on the adjuster is worth 5mm at the F wheel it is easy to undestand why.

                        Regards.
                        Jim

                        Comment


                          #13
                          Originally posted by posplayr View Post
                          I Would like to see that device, but from your description " pivot center to axle center" not sure if you mean axial center or mid point. Regardless, this doesnt take into acount any other issues such as frame tweek. Without knowing much more, a dragster is not so worried about front wheel alignment but rather drive wheel alignment in the frame.

                          The laser and string methods are directly measuring one wheel with respect to the other for both alignment (parallel) and being on center (no lateral offset).
                          It is the center of the swing arm pivot bolt to the center of the axle...a center punched mark is very helpful...
                          The tool is just a long rod with pointed arm at one end and a sliding/locking pointed arm at the other...
                          I'd take a picture, but I've always borrowed one at the track...at home, I just use a tape measure, which works OK.

                          But you are correct...this only assures the wheel is aligned with the swing arm and doesn't take into account if the frame is tweaked...
                          We like to assume our frame is straight.... And we don't use the front wheel much anyway....

                          I've used this method on my street bikes, and it seems to work fine...but I never verified it with a different method...
                          Bob T. ~~ Play the GSR weekly photo game: Pic of Week Game
                          '83 GS1100E ~ '24 Triumph Speed 400 ~ '01 TRIUMPH TT600 ~ '67 HONDA CUB

                          Comment


                            #14
                            Originally posted by salty_monk View Post
                            So far I've seen the string method & Matchless's variation using a laser level.

                            Anyone got any other methods worth looking at?

                            Dan
                            Technical Info posts that are deemed to be important or popular will be placed here for easier access. If you feel a post should be moved from the Technical Info forum to here then PM the Administrator with your request.


                            Last post is my method but the rest is worth reding

                            String = a waste of time & effort
                            lazer = more accuate but much more difficult to do

                            tone

                            Comment


                              #15
                              I guess my question is is after my eyes bloodshot from reading this thread about how to check and verify or question ideal wheel alignment... is it worth it on a 25 year old street driven motorcycle that does not exibit any type of obvious ill handling, or unusuall tire wear behavior? In the past 6 motorcycles i've owned, not one of them did I ever suspect the need for a "chassis alignment" . Just my opinion, but if some of you are loosing sleep over + or - 1mm you shouldnt be screwing around with string and lasers, do it the RIGHT way and take your bike to a motorcycle specific chassis shop .

                              Contrary, race bikes, or a bike that tried to move a tree or guardrail, well that's a different story...
                              Last edited by Guest; 10-13-2009, 06:44 AM.

                              Comment

                              Working...
                              X