Fuse conversion form 'old' type to new

[headsbikesmopars]

Would like to covert from 'old' round buss fuses to the newer push type. Any kits out there? Thanks.
Terry

[BassCliff]

Hi,

Paging Mr. Steve!

You probably want something like this to replace your old fusebox:



Here are some links related to this particular product...

http://www.cyclenutz.com/products/electrical_accessories/fuse_panel_relays/centech_fb-6_atc_fuse_block_2.html

https://www.cyclenutz.com/electrical/fuse_block_installation.html

http://www.cyclenutz.com/electrical/fuse_block_and_relay_installation.html

There are also several similar products from http://www.fuzeblocks.com/ and others.


Thank you for your indulgence,

BassCliff

[jeepenstein]

I'm doing this mod as well, I just picked up a 6 circuit block from napa... Isn't as cool as the one pictured above but it serves the purpose and fit up ok..

BUBBA

[Steve]

Paging Mr. Steve!

Huh? What?

Oh, hello, I wondered why my (non-existant) pager was sounding.


New fuse block?

No problem. How much you want to spend?

You can get a stock one from an '83 or newer GS for $37.57 at PartShark.
Part number 36740-45D00 (replaces 36740-49400).

You can get one from Amazon.com for varying amounts of money, depending on which one you choose of the 366 units that show up in that search.

You can get a Centech unit with five fuses for about $55.

You can get an 8-fuse unit from Eastern Beaver for $65.
Very nice unit, has two fuses that are 'hot' all the time, the other six are switched with the key.

You can get one that has 13 fuses, 28 circuits, horn relay, turn signal flashers, etc. all built in from Centech for $125, but that one is more suited to my Wing.


How much did you say you wanted to spend?

.