polished caps

[Guest]

Have to say Thanks to member "Ram" here on the site, for these caps, they were not polished like this when I got them I forgot to take pictures for the before, but after about a 1/2 hour of polishing on the wheel, this is what I ended up with...








.

[Steve]

.

[Steel Toed Tank]

Those look pretty sweet!
Doing the bowls next?

What is your polishing set-up?

Tank

[GateKeeper]

Nope, not going to do the bowls, was not going to do the caps either as my original ones are plastic and I painted those, these I just got, so I might use them...

as for my setup, it's very basic














and some sandpaper, micro fibre cloths, a dremel tool for those tight spots, and a lot of patience.......

[7981GS]

Same sized spring cups in both sets of caps?

Eric

[GateKeeper]

I don't know, I have to take one off my existing setup and compare, I hope they will work....

[ram]

I am glad I could help!! Now Let me ask that Cap back!! LOL

[GateKeeper]

I am glad I could help!! Now Let me ask that Cap back!! LOL

NO.....LOL

but you can have the black plastic ones, or I can polish up the ones you have on your bike.....

let me know, what I owe you for these ones,,,,,let me just make sure they are compatible....first...

.

[trevor]

Ya gotta do the bowls now! I just did my caps with the same result and had to do the bowls to match. You gonna clear coat?

[GateKeeper]

Naw, not going to do the bowls, way too much work, and I am not about to remove the carbs, it's a real PITA, so the bowls will stay as is...

clear coat, nope no need the caps are aluminum so I should be OK, just keep an eye on them and some metal polish once in a while should suffice

.

[ram]

NO.....LOL
let me know, what I owe you for these ones,,,,,let me just make sure they are compatible....first...
.

First find out how well they fit your Carbs. I am pretty sure they should be the right fit!