• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

1983 GS 1100E IDLE noise

  • Thread starter Thread starter Anonymous
  • Start date Start date
A

Anonymous

Guest
Have had my GS 1100E for 10 years- bought from original owner in Va now in Florida. Bike has recently developed noise (sounds like a diesel) at idle. Much worse at about 850 rpm, better at 1200 and gone at 2-3000 rpm all standing still. Diesel sound (sounds like knocking) also occurs launching under load (engaging first at low rpm). Also makes this sound under heavy deacceleration (engine breaking). Engine runs fine when cruising (not accelerating or deaccelerating). Checked cluch and rotor/coil assembly-no loose or faulty parts. Told that the engine noise at idle may be due to a clogged carb, with dead cylinder and engine fighting itself at low rpm. Thinking problem may be slop in main bearings or in transmission. Anyone have any thoughts? Could use additional brain power. Next step will probably be carb rebuild. Afraid I may have to rebuild engine.
 
Sounds like a rod bearing going bad if you hear knocking, (maybe piston slapping???). I don't think it's your carbs not in less they are just dumping in raw fuel into the cylinder causing a hydraulic lock condition. Pull your spark plugs and how do they look, they should be dry and brown. If they are wet it may be fuel or oil. Easy way to check Carb/Firing is when the engine is cold start it up and touch each exhaust pipe they should start getting hotter and all feel the same temp. If one is cooler than the rest check for spark first then move on to the carb that feeds the cylinder. I would'nt ride it until you can figure out the problem.

Good Luck
 
I had the same problem with my 1983 1100 e. It turn out to be the sprag clutch bolts had sheared off due to the starter sticking. Check it out.

Matt
 
Here's a shot in the dark- Are all your spark plug caps on the right plugs? I know it's improbable but wouldn't it be funny (as long as it wasn't your bike)?

Michael
 
Took some time

Took some time

Thanks for the responses. Have installed a new clutch and rebuilt the carbs. Noise still persists. Checked generator side of engine again-first time in June, again last weekend: found 2 sheered bolts holding starter clutch to rotor, third one, loose and ready to go. Matt, I should have listened to you 6 months ago. BTW-a real pain in the a** getting that rotor off the crank shaft.

Thanks again,

Bob L.
 
Dude,
all that matters is you found it and fixed it before it blow through the side of the crankcase. Glad to have helped.

Matt
 
You must log in or register to reply here.
Back
Top