1st Gen 750 tail/rear cowl removal

[MadCapsule]

I want to remove the tail piece from my bike for stripping and paint, but I can't seem to find where the mounting points are.

I can see a couple of pop rivets, but it seems unlikely that Suzuki would make the owner drill out rivets just to remove the tail piece.

Any pointers would be appreciated.

A search didn't turn up anything, but I may have used the wrong terminology.

 

[JAG]

I want to remove the tail piece from my bike for stripping and paint, but I can't seem to find where the mounting points are.

I can see a couple of pop rivets, but it seems unlikely that Suzuki would make the owner drill out rivets just to remove the tail piece.

Any pointers would be appreciated.

A search didn't turn up anything, but I may have used the wrong terminology.

There should be three bolts (Nos 16, 17, 18) mounted under the rear mudguard. If there's rivets its been bodged in the past.

 

[MadCapsule]

Thanks. I'll give that a try.

 

[chuck hahn]

Three 10MM nuts up under the fender in the very back corners and 1 in front of them..in a triangle pattern. Use a 1/4 inch socket and a 2 or 3 inch extention so you can get low enough to have some working room with the ratchet.

 

[MadCapsule]

That worked. Thank you both.