Bespoke made Exhaust systems

[ukjules]

Does anyone know anyone who can make a exhaust system
possibly in stainless steel for a 1980 GSX 250 ET as per picture ?
A bespoke one identical to the ones in the picture, 2 * downpipes
and a silencers.

It would be great if they were in the UK.
I was however thinking of flying to india to get them hand made .......
as i simply cannot find anyone ?

I am even considering learning to weld exhausts ....

 

[hannibal]

A custom exhaust will be more expensive than an off the shelf product. Does it have to be custom?

Also, isn't that a stock exhaust in the pic?

 

[Guest]

In your situation, I would make do with a second-hand Motad (or something similar), and watch Ebay, VJMC, this site, go to autojumbles etc. Something will turn up eventually, but an immediate fix is going to cost a damn sight more than the bike did.

 

[ukjules]

Motad dont make 2 into 2 for my bike..... anymore.
They have stopped making the 2 into 1 too - not that i want one in the long run. I have one of those now - it is fine but
you cant have a 2 into 1 on a 250 - it is dreadful.

I think i will have to sit and wait for the 2 into 2 parts to come in on ebay.
Thing is i have seen nothing re silencers or downpipes.

Id like to redesign - stainless steel - look same as standard - but without the under mixer unit
, just pipes end to end (2 of them).

as you say it will costs a lot.
I so wish i could weld ! i simply want the same as standard.

 

[salty_monk]

You must be able to find someone to make you the two head pipes... especially if you use stock collets to bolt them to the frame as then it's only a rolled end on the pipe and a couple of bends.

Then find an exhaust Can you like for a different bike & buy two of them. You might have to fabricate an adapter bracket to bolt them to the frame.