• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

choke

  • Thread starter Thread starter sk843143
  • Start date Start date
S

sk843143

Guest
ware can i get the choke seals>>> i did a carb rebuild and now i cant find these seals>>> or do they normaly need replaced>>>>
 
I have never had to replace one, but I have never dipped them.

You didn't dip them, did you? :-k

.
 
no i didnt dip them ..... but they just dont look like they would seal verry well..... also whare can i get some float bowl drain bolts that are drilled so i can verrify float height settings>>> (i dont have a drill press to do it my self. i did serch but came up empty)
 
sk843143 said:
no i didnt dip them ..... but they just dont look like they would seal verry well..... also whare can i get some float bowl drain bolts that are drilled so i can verrify float height settings>>> (i dont have a drill press to do it my self. i did serch but came up empty)
Click to expand...

You drill them yourself. You don't need a drill press. I just clamped mine in a vice by the hex head and drilled through with a hand drill. I then drilled a slightly larger hole inside the small hole and inserted a short length os steel tube and soldered it in place.

I must say though I have never used it. I set the float levels when the carbs were dipped and cleaned and the bike has run fine ever since, so I have never had to check the float levels.
 
do you still have the ones that u drilled.... if so would u b intrasted in selling them..... i dont have any extra bolts to drill and bike boneyards are few and far between around here..... thanx for all the info i realy app it
 
You must log in or register to reply here.
Back
Top