• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Do I need a new chain?

  • Thread starter Thread starter Anonymous
  • Start date Start date
A

Anonymous

Guest
I've got a general chain question, regarding my other bike. :oops: I've been running an o-ring chain for about 15,000 miles on my 1975 Honda CB750 K5. I replaced the sprockets at the same time. It seems as though it has hardly stretched at all; however, there are some major tight spots. When I check the slack in the bottom run of chain between the sprockets, it is very loose at one point on the chain. Then, I rotate the rear wheel about half way around, and it is much tighter. Right now, I've got it adjusted so that it has a 3/4" of slack at the tightest part, and the loosest part doesn't rub on anything. Is this normal wear? Is it time to replace the chain? What causes this? The adjusters are lined up with the second line from the front of the swing arm, so I've got a lot more strech that I can take up, but that doesn't seem to be the problem. I hate to have to replace a chain that has hardly stretched at all.
:cry:
 
I am wondering what type of lubrication you use on your chain??? Would you please tell me
 
slopoke said:
I am wondering what type of lubrication you use on your chain??? Would you please tell me
Click to expand...

I use Maxima Chain Wax on both of my bikes. I lube it about every 500 miles or whenever it looks dry, whichever comes first.
 
would you consider soaking it in kerosine and then soaking it in oil to see if it is not just dry in some spots--it sounds like the thing is not totally lubed --juat a wild guess
 
It's worth a shot. Kerosene is a lot cheaper than a new chain! :) Thanks for the advice.
 
xcvii90 said:
It's worth a shot. Kerosene is a lot cheaper than a new chain! :) Thanks for the advice.
Click to expand...
the kero is just to clean it--you must soak it in oil afterwards
 
I didn't have time last night to take the chain off and soak it, but I cleaned it on the bike with a lot of WD-40. I inspected it link by link, and found that only one was stiff.

Hopefully tonight I can take it off and soak it in Kerosene to get it really clean. Then, I'm going to try to work some PB Blaster penetrating oil into the offending link to try to free it up. Assuming I can get it free, I'll soak it in oil before I re-install it. What weight oil do you recommend? Will it really seep in under the o-rings? How long should I soak it?

If I can't get the link free, I may try to remove the bad link and install a second master link. I really hate to buy a new chain since all of the links are free except one.

Thanks for your help. :)
 
I dont have any idea what weight--I would use plain motor oil or better than that, a bar and chain oil--i like to soak things overnight unless there is a reason for not doing so. Il bett some of the guys have lots of recomendations on what to use in the soaking process--I believe that wiping the chain with a clean rag after soaking would be in order. Maybe even hang it a bit to drain the excess off.?????
 
You must log in or register to reply here.
Back
Top