• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Hand impact driver or Dewalt Impact driver

  • Thread starter Thread starter kfb
  • Start date Start date
K

kfb

Guest
I have some phillips screws that hold the countersprocket cover that are stuck tight. I managed to get one of them out, but there are 5-6 remaining. I have been told to buy a hand impact driver to get them out.

I already have a Dewalt rechargable impact driver. Will that work as good? I don't want to damage the screw heads further but thought that the Dewalt might work better than using a hammer with the manual driver.

Thanks.
 
The only thing with the DeWalt is that you won't get the benefit of the hammer hitting down and forcing the bit into the head.
 
Use the hand impact driver. They're completely different types of tools with unfortunately similar names.
 
Not all electric drivers are really impact drivers.

taken from wikipedia

These are not to be confused with the impact wrench, which is a motorized tool (usually powered by compressed air), with a similar name and function. These also use a hammering action to apply torque to fasteners. The difference is that impact wrenches do not provide the positive engagement that impact drivers offer as mentioned above. This is desirable though on hex head fasteners and others where the downward seating action is unnecessary and potentially damaging. To add to the confusion, they look identical to motorized impact drivers.

Buyers must also be aware that some tools improperly advertised as impact drivers are actually just impact wrenches. The only way to verify that a motorized impact driver is truly what it claims to be (without taking it apart) is to try it before purchasing.
 
Get a hand impact tool. Note that, in MY opinion, the fitment of the bits is every bit as important as the impact. My Craftsman hand impact tool has been my best tool purchase ever - though I've only had to hit it for three screws (bearing retainer bracket). Sure I could have gotten a cheaper one, but just those bits are worth the extra $$$. There were some screws I just KNEW I was going to have to cut slots into, but that impact driver loosened them - by hand, no hammer - without the slightest bit of slippage or damage.
 
Impact driver

Impact driver

I will pick up a craftsman hand driver tonight. If this can save me drilling out the screws it will be worth it's weight in silver.
 
I own the super cheap harborfreight one and it has worked exactly as expected. Bits have held up great so far, and if it breaks or falls apart then I won't be too upset b/c it only costs $5.
 
Technique is important, practice on something you don't care about if you haven't used one before.
One method, tap, tap, tap gradually increasing twist and impact until it lets go...
another way is to tap the bit alone into the screw very tightly and then put on the handle, twist it and give it a good whack.
These both work on certain screws, but it takes a little experience and feel to know which to use.

There are other techniques too.
 
Dreef1999 said:
I own the super cheap harborfreight one and it has worked exactly as expected. Bits have held up great so far, and if it breaks or falls apart then I won't be too upset b/c it only costs $5.
Click to expand...
Bits definitely outlast the driver. I have three sets of bits and one driver that works sometimes....:D

I think next time I will go ahead and buy a higher quality one.
 
dardoonk said:
Bits definitely outlast the driver. I have three sets of bits and one driver that works sometimes....:D

I think next time I will go ahead and buy a higher quality one.
Click to expand...
Good to know :eek: You still have budget for 2 more drivers before the cheap route loses to the sears route!
which HarborFreight impact have you been destroying?
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=37530
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=93481
 
You must log in or register to reply here.
Back
Top