HEI conversion, any problems?

[genejohnson]

Ignition Advance

Ignition Advance

I find it hard to believe that advance can be built into the ignitor. How can you electrically make a spark happen before it happens? Retard the spark electrically, yes, but Advance it? Gene

 

[SqDancerLynn1]

Mind you I have never done it. Someone did it. Replaced the rotor with mechanical advance unit - machined down to fit in the end of the crank and retrofitted a dyna III. Need to modify the cover too. Not sure if he redrilled the plate mounting holes?
I would think it is possible, retro fit the advance unit and the signal generator from an older model for use with the HEI conversion.
I would just verify the timing with a light...

I would check the transistors Those D1071's mounted on the heat sink. Check them like a diode

 

[Calvin Blackmore]

I find it hard to believe that advance can be built into the ignitor. How can you electrically make a spark happen before it happens? Retard the spark electrically, yes, but Advance it? Gene

it would just be a setting to set a threshold and alter the spark timing after that threshold is passed

i think the advance is two settibgs not any sort of curve

 

[tejasmud]

Here is what the manual shows.

lol

How many points do you need to make a curve? Might not be a pretty curve, but ya know..............


I think I have read that someone has done it as well, not on a 700 me thinks, but it has been done on a different machine.

Thanks for the pics on the inside of the box, both sides.




E

 

[tejasmud]

You get this fixed yet Vista?

There's an ignitor on the bay a little less than what I normally see them go for.

You seemed to say everything checked out when testing.

Anyways here's the link.


http://cgi.ebay.com/ebaymotors/SUZU...5083523QQptZMotorcyclesQ5fPartsQ5fAccessories


E

 

[vista461]

No not fixed yet, gotta wait til I get a few extra bucks to buy the part.