• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

How to fix 1150 valve cover towers (if you want to hold high mass)

Greg B

Greg B

Forum Mentor
Past Site Supporter
Have you ever bought a bike, and once you had to open it up you found things that made you say "Aw CRAP!"?
Here's what I went through. Kind of a PIA but hey, whadda ya want.
crack.jpg

You can see the small crack. While not bad, doesn't give one the warm fuzzies. So, I made a fixture to mount in the lathe and get the hole running true.
register2.jpg

Machining the register. Just wanted a true diameter. Size wasn't important.
collar.jpg

Once that was done I turned a collar that was about a .001" slip fit on the register I had just machined.
collarinstalled.jpg

Collar installed with some Loctite RC680. That ought to keep it in place.
 
Oh, it gets worse. On to the second tower.
pieces.jpg

This one won't be so easy.
boring.jpg

Using the same fixture, I bored and threaded what was left of the original hole. Being careful not to machine any deeper than the depth of original hole. Breaking into the cam journal is BAD.
insert.jpg

Next, a threaded insert to screw in place. I also threaded the "tower" portion, because I intend to (in belt and suspenders fashion) slather JB Weld over it to (hopefully) make the repair as strong as possible.
insertinstalled.jpg

Insert Loctited into place. Will finish it up tomorrow, after everything cures.
 
THIS is why Greg is my friend! This is also why I help him with his motors & have HIM make special stuff for me! GREAT job pal! Ray.
 
Finishing everything up.
Tapped.jpg

Cam cap back in the lathe, faced to length, drilled and tapped. You can see how I coated the part with JB.
Coverscrew.jpg

Ta Da.
Boltclearance.jpg

I needed to machine clearance for the cap bolt since the epoxy had oozed.
 
Finished3.jpg


Finished2.jpg


Finished1.jpg

And there you have it. Two repaired towers. I realize not everyone has a shop in the garage. But I hope some folks enjoyed this.
Greg B.
 
I suspect the previous owner was removing the valve cover and forgot to take one of the cover bolts out.
The tower with the crack looks like the bolt was overtightened.
 
Impressive work Greg. You obviously have some significant skills.
 
Nice. How did you make the fixture that holds the bearing caps in the lathe?
 
I've had them so bad that I have had to rob a tower off a ruined head. Its amazing at how many will work. I either use a air gauge or plasti gauge to check them for clearance.

Nice work! If I'm not mistaken isn't that a 7mm bolt in those towers? I had a heck of a time getting heli coils for them.
 
The "fixture" is really nothing more than a slug of aluminum bar I had. Faced in the lathe so it was dead perpindicular to the lathe axis. My chuck has a threaded back plate so I can unscrew the chuck without taking the slug out and it remains in the same orientation when I put the chuck back on. As you can see, I switched over to a collet to make the other parts.
I held a pin in the tailstock to roughly locate the cam cap. Then I marked the mounting hole in the slug. Drilled and tapped for 10-24 button head screws. That way I had plenty of clearance to indicate the cap.

I have two other 1150 heads but If I had scavenged caps from them I would need to come up with other caps when I got around to building those motors.
You can get 7X1mm Helicoils from McMaster Carr. I recommend you get the proper installation tool, the one that compresses the insert during installation.
I ended up buying a 7X1mm tap, again from McMaster. I have the Helicoil kit, but wanted to just tap the tower directly to keep the material as thick as possible. There is enough meat to Helicoil it later if necessary.
 
You must log in or register to reply here.
Back
Top