If I wanted to replace all my carb screws...

[GateKeeper]

So the kit only includes enough screws for the tops and bottoms, but nothing for the rails ? right

This is why I went and purchased mine individually

 

[old_skool]

Here's where I got my other screws for the rails http://www.ebay.com/itm/300584654906?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

 

[Good Times]

So the kit only includes enough screws for the tops and bottoms, but nothing for the rails ? right

This is why I went and purchased mine individually

Correct. No float bowl screws either. I'll see if I can find the other screws locally.

 

[GateKeeper]

Float bowl screws are original, I did not change those.....

 

[old_skool]

I've bought a lot of hardware in the past from this guy
http://www.ebay.com/sch/stainlesscy..._trksid=p3984.m1439.l2649&_trksid=p4340.l2562

 

[ny_redneck04]

Have you looked @ boltdepot.com?? you can buy 1 or a 100 and seems to be reasonably priced

 

[ddaniels]

I believe our own Robert Barr sells bolt kits too correct? I think that's where I got mine. And, you don't need to replace the float bowl screws since they are hex on the o.d. anyway.

 

[GateKeeper]

I believe our own Robert Barr sells bolt kits too correct? I think that's where I got mine. And, you don't need to replace the float bowl screws since they are hex on the o.d. anyway.

Only the 8 required for the intake boot/tubes