K
kylemanley1
Guest
So long story short I've had a charging issue with this bike from day one. I replaced the stator with a caltric (now wishing I'd forked out a bit more cash for the good one) and problem didn't go away. So I replaced the r/r with a caltric gs 550 replacement and things seemed to go ok for a bit. Now it's not charging and these are my readings.
Stator test
DC key off 11.8
@ idle 11.8 @4000rpm 11.86
Ohms between legs of stator .8-.9
Ohms Legs to ground all 0.L
AC @4000rpm 56-57.5v
R/R test
Set to ohms tested red output wire to each R/R wire got between 17 to 19. Should be 0 ohms
SHOULD I BE THINKING THEY ARE BOTH SHOT?
Stator test
DC key off 11.8
@ idle 11.8 @4000rpm 11.86
Ohms between legs of stator .8-.9
Ohms Legs to ground all 0.L
AC @4000rpm 56-57.5v
R/R test
Set to ohms tested red output wire to each R/R wire got between 17 to 19. Should be 0 ohms
SHOULD I BE THINKING THEY ARE BOTH SHOT?