G
glstine
Guest
I had to replace the plug for the right handlebar switch because the plug on the wiring harness was smashed. Only three of the wires were still physically attached to the plug and 5 wires with the blades were dangling to the side. After scouring the wiring diagram I found it must be the right hand switch plug. The only problem is the plug from the switch only has 7 wires on it. There is a white wire on the harness side that doesn't match the wiring diagram or the plug from the switch.
Does anyone know what this wire is for? Or if someone has an 80 850 with the tank off and could take a look at this plug and tell me if the white wire is there and if it goes to anything, I am wondering if it is an extra wire that is just there for some unknown reason.
Does anyone know what this wire is for? Or if someone has an 80 850 with the tank off and could take a look at this plug and tell me if the white wire is there and if it goes to anything, I am wondering if it is an extra wire that is just there for some unknown reason.
Last edited:
