• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

New Shocks Question

  • Thread starter Thread starter Roostabunny
  • Start date Start date
R

Roostabunny

Guest
Hey fellas,

My new shocks arrived from CRC yesterday - wahoo. Very shiny.

They came with several sets of rubber bushings with small, medium, and large ID's and some small plastic mystery tubes.

Seems pretty obvious that I'll pick the bushings with an ID that's the closest match to the studs on the bike, but what about that tube? It's stepped with three sections and the OD's match the three ID's of the bushings. Seems to me that I need to cut this thing apart to give me a plastic sleeve the right size to fit inside my chosen bushing to go between the threads and the bushing, right?

Also, any tips on setup? I'm at 210lbs today. I do mostly commuting miles, about 50/50 street and freeway with an occasional jaunt to the hills.
 
Roostabunny said:
Also, any tips on setup?
Click to expand...
You are correct, you will need to select the plastic bushing that matches the rubber grommet that gives a snug fit. When you tighten the mounting nuts, be sure to snug them enough that they don't come off, but not so tight that the shocks can't move on the bushings.

Setup? Adjust them so the bike is about one inch lower with you sitting on it than when you're not.
Helps to have a friend measure from the back fender or license plate to the ground.

.
 
Steve said:
You are correct, you will need to select the plastic bushing that matches the rubber grommet that gives a snug fit. When you tighten the mounting nuts, be sure to snug them enough that they don't come off, but not so tight that the shocks can't move on the bushings.

Setup? Adjust them so the bike is about one inch lower with you sitting on it than when you're not.
Helps to have a friend measure from the back fender or license plate to the ground.

.
Click to expand...
Perfect, thanks, Steve!

Total newb question for clarification after reading through so many threads. When I'm making this adjustment, I'm changing the "pre-load" in order to get about 1" of rear suspension "sag" with my weight? All the same thing right?

I'll get those on then turn to the forks.
 
Last edited:
chef1366 said:
What'd you weigh yesterday? \\:D/
Click to expand...
More importantly, what do you plan on weighing in the near future?
(That is what you want to set up for.)


Roostabunny said:
Perfect Steve!
Click to expand...
Hey, I LIKE this guy! 8-)

Roostabunny said:
When I'm making this adjustment, I'm changing the "pre-load" in order to get about 1" of rear suspension "sag" with my weight? All the same thing right?
Click to expand...
That's it, exactly. And when you get to tuning the front, you can go about 1.5" of sag. The basic idea is to have not more than 25% of your available suspension travel used up just by sitting on the bike. The rear usually has about 4" of travel, the forks have about 6".

Tuning the preload on the forks is a little more involved, as you will have to fabricate a spacer to load the springs. Your best bet, especially considering your weight, is a set of Progressive springs. You will still have to tune them for ride height, but they are better springs than the stock ones, especially when you consider that the stock springs are about 25 years old and have fatigued just a bit. :shock:

.
 
chef1366 said:
What'd you weigh yesterday? \\:D/
Click to expand...
I weighed 217 two weeks ago, and to Steve's question, in the near future I plan to weigh just under 2 bills. South Beach diet - works for me. :-D

Hope it doesn't work too well, or I'll be ebaying those stiff MIDI shocks.
 
Wahoo! OK, I'm sooo, glad I finally listened to one of Bwringer's diatribes/rants about OEM/Original Shocks.

Naturally, I still feel the bumps, but I no longer feel like bridge transitions and manhole covers are tiny launch ramps! More importantly, I now know that the bike is not supposed to squirm over every groove, divot, and seam in the pavement that's not exactly perpendicular to the road.

Next the forks.

Thanks all, and thanks especially to Brian for literally scaring me straight!
 
You must log in or register to reply here.
Back
Top