Starter relay wiring

[Guest]

Hey Guys,

Can anyone confirm which cable goes to which connection on the starter relay, is is as below



Thanks

Mat

 

[Rich82GS750TZ]

NO.

The posts with nuts get connected the battery + and the lug on the starter motor (pretty sure it doesn't matter which.)

The screws in the corners connect to nothing, they are just screws holding the solenoid/relay together.

The solenoid has no other ground point than the screws that connect its plate to the bike's plate/frame. This is a common place to mount all other ground lugs in the area to create a Single Point Ground, aka 'SPG"

The sense wire, which you show connected to nothing, connects to the start button.

 

[rphillips]

Yep, look closer, the screw that you have connecting to the starter switch is just a reinforcing clip holding the orange wire, that connects to the starter switch, so it is less likely to get pulled off it's connection point.

 

[Guest]

ah perfect, thanks for the clarification guys!

 

[Steve]

The ground might actually be the mounting ears, not the screw you show.

As Rich and Rick mention, the connection to the starter button is the yellow/red wire that is hanging below the solenoid. On a GS, that is actually yellow/green, so that is not a GS solenoid. No worries, they all pretty much work the same.

.