• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Stripped pilot screw. Options?

  • Thread starter Thread starter claygs750e
  • Start date Start date
C

claygs750e

Guest
So I'm currently tearing down all the carbs, cleaning using the dip cleaner. Carbs 1-3 all look good and ready to reassemble, but carb #4 has a completely smooth pilot screw from the start. Tried heat and pb blaster, tried cutting into the housing into the metal and nothing. I have a feeling with my last ditch effort of attempting to drill it out I've probably ruined it (pictures attached) SO what are my options now since it's really tough just finding a #4 carb. Do I have to buy an entire new set? Can I buy 1-3 carbs or does it have to be #4? Thanks,
 
Looks like you need a new carb body. You have to get a #4, they aren't interchangeable. Put up a wanted ad, there probably someone with one somewhere.
 
Have you been using a lrft hand drill bit? It could still come out with one.

I may have a #4 body for you.
 
You Can Do It

You Can Do It

Try something like this:

http://suzukigs1100.blogspot.co.uk/2013/02/carburetor-break-down-part-4-day-182.html

I think you do have to get it out and I think you will be able to reuse that carb body. The thread holding that needle jet is quite deep. If the screw is still stuck then at least there is some thread in there to hold a new one.

Drill the bugger out. The metal is not too hard if you have a good drill. Start with a small one. If will eventually fall out.

You may even be able to rebuild that section with a little JB Weld. It was made quite deep to hold those EPA caps. The European ones are far less tall than that.

Good luck.
 
Last edited:
Nice write up. I've tried pretty much everything you mentioned except drilling further down which I will be doing here shortly. I just assumed that I've already went down to far and took out the threads on the hole. If this doesn't turn out well here soon then, tken02 I would be interested in that #4 carb if you have it.

One other thing. If for some reason I can't get the pilot out and I can't find a #4 carb can I tune the bike with leaving it in there since everything else looks great? Thanks
 
The carb rebuild tutorial details how to cut a new slot in the screw with a dremmel cut off wheel. Did you not read it? (linked in my signature as well at Cliff's website). There are also tons of threads on this in the archives (waiting for you to find and read). A tight fitting screwdriver, heat, PB Blaster, more heat, more PB Blaster, and those screws come out 95% of the time. Worst case, use a dremmel tool to cut a new slot in the screw. Then back at it with PB Blaster and heat until the screw comes out. It's actually quite simple as long as you don't hamfist the removal...which you seem to have done (big time). Live and learn I guess...
 
Last edited:
I did read through the tutorial step by step as I was doing it. At one point I got to the step where I had dremeled out a slot into the screw, but no matter how much heat and PB nothing I used it wasn't moving and kept striping out the slot I made. Keep in my the is my first ever try at this so I could've been a little rough or not had the right touch, but I did follow the steps.
 
Well I'm going to keep trying, but it looks like I've gone down to far now and will lose to many threads. On a side note when I called cycle recycle and he looked up the stamp on the carbs it looks like I have carbs from a 80 GS850G (thought it was stock for my model) so the dynojet kit I just ordered will need to be returned.
 
They may share a common jet kit, the eight valve 750 and the 1979 850 shared a common carburetor and jetting.
 
I called Mike from Z1 and he said the kit looks pretty different from the 850 and 750 stage 3 kit. If you look on their site none of he parts are the same so it looks like I'll be returning it. Glad I found out before I opened it.
 
You must log in or register to reply here.
Back
Top