A
Anonymous
Guest
A few weeks ago after warming up the bike, it died pulling out of the driveway and then had no spark. I initially though it was the signal generator but that checked out OK, then I was pretty sure it was the ignitor, so I went ahead and got a Dyna 3 which took more than 2 weeks to get. I put it all in and at first it didn't work, but it was the same no spark. The coils tested good, but the voltage I was getting at the coils seemed low ( like 9V), there was a thread about something with a dying battery causing weak or no spark, so I put the charger on let it charge maybe 15min and then tried cranking with the charger attached to boost it, with a plug on the head it turned a couple times and then started to spark. I put it together, and started it, warmed it up, headed down the driveway and the same thing happened, no spark. Then I kept the charger on for like an hour, and tried again, no spark. This sucks. I changed the fuses, and I guess the Dyna 3 went in right since it ran a bit. Maybe someone could give me some suggestions. Tips on testing a battery for life?
Thanks, Ed
Thanks, Ed