K
Kyler
Guest
this is hard to explain so bear with me. This pertains to my race motor which is a 1980 GS750 motor.
It is giving off something - noise, IR, EMP, somthing - that caused a dyno to reboot when the RPM clip was attached to a plug wire. Also my Innovate MTX-D oil presure/temperature gauge reboots as well.
The ignition and regulator is stock. There are no lights, turn signals, etc. The headlight wire from the regulator is disconnected.
I do not have any filters installed on the plugs or anywhere else.
What do you think could be causing the problem?
It is giving off something - noise, IR, EMP, somthing - that caused a dyno to reboot when the RPM clip was attached to a plug wire. Also my Innovate MTX-D oil presure/temperature gauge reboots as well.
The ignition and regulator is stock. There are no lights, turn signals, etc. The headlight wire from the regulator is disconnected.
I do not have any filters installed on the plugs or anywhere else.
What do you think could be causing the problem?