siriusconinc- sirius consolidated inc

[Guest]

I bought some carb kits and a brake master cylinder kit from them.
I was surprised at how fast they shipped them, i am in Australia and i got the kits within 10 days.
I bought some items off ebay, and some off the website and they shipped them altogether.
I havent rebuilt the carbs yet, but they look to be the correct kits.
Anyway, hope this helps someone.

[steve murdoch]

Landshark, I have used these guys on numerous occasions and have had excellent results as well. They are a bit more expensive than others, but they always have the part i need in stock.
I try to support local business and Sirius is about a 90 minute ride for me.
No shipping charges are a good thing!

[TitanNeil]

Sirius Consolidated / Sirius Motorsports

They are in Cambridge, Ontario, Canada. (My hometown!) They also sell quite a bit on eBay.

Was in Cambridge last week so I went there with a shopping list of parts needed for various bikes I am 'reviving'. A '75 Honda GL1000, an '80 Honda CB750F, and 2 1982 GS1100G's.

Sitting in front of the parts counter was a pile of new front brake lines - just so happens they are for the 1975 GL1000. Fancy that.

VERY helpful gent behind the counter, and I could see a fella tinkering on a workstand with a mint 1973 Honda CR125 - I think this business is fairly serious about catering to the 'old bike crowd' as they have lots of good stock, are well organized, and sahre info and sources willingly.

They had everything I needed. Ever find GS1100G OEM front brake levers for $5 or OEM valve cover gaskets for $10? Me neither, so I bought several, plus stator cover gaskets. They have a very decent stock of old gaskets, carb kits and NOS Suzi parts. Their website is great and prices are indicated.

I will definitely be ordering from them in the future.

[chuck hahn]

post up a phone number for them. I want it in my phone too..

[razooki]

Here you go

http://www.siriusconinc.com/contact_us.php

[pete]

I'm approaching brake rebuild time... good to know this info! And good to see they ship to Australia in good time too landshark!

[SqDancerLynn1]

Use your original jets if possible. Or at least verify the sizes. Some kits do not have the mixture screws too...

[landshark]

I put in a stage 3 Dynajet at the same time and so far so good with everything in the carb kits, of course i put in the O-ring kit from Mr Barr as well.

I havent bought anything from then since, but definitely will in the future.

Pete, the shipping was much quicker than some of the others i have used.

[pete]

Definitely good to know...