Ken
Announcement
Collapse
No announcement yet.
keyster carb kit GS1000G
Collapse
X
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35615
- Torrance, CA
KS-0249 kit comes with 115 main and 40 pilot jets. Same as the 1000G. I don't know about the jet needle. What this kit lacks is the O-rings needed to rebuild the complete set. No pilot screw O-ring, drain O-ring, fuel vent tee O-rings, fuel tube O-rings.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35615
- Torrance, CA
There isn't one.
Did you break down the carbs and inspect all the brass parts for the correct numbers and wear? Typically, there is no reason to replace the brass unless it's damaged. The float valve being the possible exception, if it's worn.
If you have damaged jets, then those Keyster kits would be a good option. To supplement that, you need an O-ring kit. There is a guy around here that sells them.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Forum GuruPast Site Supporter
Super Site Supporter- Jun 2018
- 5539
- Mifflinburg, PA / Land of Tar & Chip
Um…………….
.,.,.,.,.,.,.,.,.,.,.,Rich
1982 GS 750TZ
2015 Triumph Tiger 1200
BikeCliff's / Charging System Sorted / Posting Pics
Destroy-Rebuild 750T/ Destroy-Rebuild part deux
- Likes 1
Comment
Comment