what did you wrench on today??

[Allie]

I made a camera mount out of a broken training wheel and the top of a tripod. The tripod can still be put back together and used easily. Yes my bike has training wheels!

[Qckslvr]

today is big day for the GS750. Putting the forks back together, already rebuilt the calipers, and master cylinder. Reassembling the cluster, reassembling the triple clamp, installing the new bars. Replacing a bunch of burned up wire, oil change, and last re-installing the header. I got my BFH and channel locks so I am ready!!

Pictures to come later

[Mysuzyq]

I made a camera mount out of a broken training wheel and the top of a tripod. The tripod can still be put back together and used easily. Yes my bike has training wheels!

Very ingenious! That should work great....a little rubber between the pieces might provide some vibration dampening (should it be prone to occasional buzzing, with the cam mounted).

[Allie]

Very ingenious! That should work great....a little rubber between the pieces might provide some vibration dampening (should it be prone to occasional buzzing, with the cam mounted).

Thank ye! there's already a rubber pad where the camera mounts to the tripod part, but I put some more rubber between the tripod and the training wheel just to be safe - if you look closely you'll see a little black peeking out. I took a short test run and am super pleased with the results. You can't see the guages or anything, but the view is nice and the picture quality is fairly steady and clear for a digi cam. The wind noise, however, is fierce and it's there at anything above .9974 mph. tape over the mic holes does nothing to quiet it, if anything it makes it more annoying. I'm not sure what to do about that one .

[Turtleface]

I made a camera mount out of a broken training wheel and the top of a tripod. The tripod can still be put back together and used easily. Yes my bike has training wheels!

I've been considering something similar for my motorcycling adventures. Have you tried it out yet? I imagine most of your riding, like mine, is done when it's nice and sunny, which would enable you to use a high enough ISO to combat any blurriness.

EDIT: Doh, you answered my question in the post above this one, that'll teach me to read the entire thread before I go posting.

[Turtleface]

Thank ye! there's already a rubber pad where the camera mounts to the tripod part, but I put some more rubber between the tripod and the training wheel just to be safe - if you look closely you'll see a little black peeking out. I took a short test run and am super pleased with the results. You can't see the guages or anything, but the view is nice and the picture quality is fairly steady and clear for a digi cam. The wind noise, however, is fierce and it's there at anything above .9974 mph. tape over the mic holes does nothing to quiet it, if anything it makes it more annoying. I'm not sure what to do about that one .

See if you can some high density foam to craft a windsock out of. The idea is that the porosity of the foam allows sound through, but the maze of tiny holes direct air away from the mic.

[cowboyup3371]

Took the stator out after several hours of fun . Interesting sight of it:

[littleroot]

Replaced speedo finally!

Old one



New one, $32 with shipping. I finally got a super deal on ebay! Here is a shot before she was mounted. Works perfectly, and had only 3000 less miles than previous

[Allie]

See if you can some high density foam to craft a windsock out of. The idea is that the porosity of the foam allows sound through, but the maze of tiny holes direct air away from the mic.

Thanks. Yes I'm staring at a sheet of Uni foam wondering if it will help. Can't hurt to try though I wouldn't be surprised to find I really need something a little more dense.

Here's a link to the test video I shot, turn the sound down and don't fall asleep

http://www.youtube.com/watch?v=VE_f0Cr9WT0

[Allie]

Old one



New one, $32 with shipping. I finally got a super deal on ebay! Here is a shot before she was mounted. Works perfectly, and had only 3000 less miles than previous

Did you ever figure out what was wrong with the old one? It looks like you may have had a piece of debris or three in it....

[littleroot]

Did you ever figure out what was wrong with the old one? It looks like you may have had a piece of debris or three in it....

Ha! It actually still worked fine after just dumping out the debirs. Later I put a rough cut piece of plastic (from electronics packaging) in as a glass replacement. Hardest part was getting all the glass separated from the surround - they really do not want people removing the glass from these things!

The old speedo served me well for about 2000 miles in that condition. Feel I got super lucky finding a replacement for $32, delivered.

Thanks for reading and Happy Fourth!

[Big T]

Took the stator out after several hours of fun . Interesting sight of it:

It's the Stator Papers for you!

Were you actually getting any output from that thing?

[Allie]

It looks like the caramel center was beginning to ooze out.

[cowboyup3371]

Lol. Well, if the multimeter was right it was only about 2.5, 2.5, and 4.5 volts on a 200v AC setting and way more ohms than it should have been. I'm still glad I replaced the R/R anyway but it makes me wonder if maybe the PO never bothered to check out this site before telling me he had to replace it. I'm sure glad I found you guys.

[gs road racer]

Hmm multimeters,motorcycles....two wheeled transportation..here's what I finished yesterday!I know it's not motorized the bike has two wheels as does the trailer and the wheelchair! Now back to the GS......