Announcement

Collapse
No announcement yet.

what did you wrench on today??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by Retrosteve View Post
    Mounted the new horns in their rightful place and took another engine case off ready for its matt black paint . I got the idea of matt black casings from Mr Kaplan who was showing a Gs 1000 with the black casings . With the chrome allen bolts it really sets it off
    Retrosteve are you referring to the custom "GSF1200ST" that Ken's head mechanic put together? '79 GS1000 frame married to Bandit monoshock, front axle, etc and a 1216cc kitted black painted GSXR 1110 motor?
    Previous GS fleet: '78 1000C, '79 750E, '81 650G, '82 1100G, '81 1100E
    Other rides: '77 XS500C, '78 XS1100E

    Comment


      Originally posted by Runningdog View Post
      I spent the afternoon fartin' aboot with the carb on the DT250.....rebuilt last week (boiled it in lemon juice and water, cleaner than when it came from the factory), but couldn't get it to fire. Finally discovered some idiot had put the floats in upside down (funny, they looked right when the whole carb was upside down on the bench). No factory setting for the idle speed needle, cranked it further in than I thought was necessary, kicked once, and the darn thing started!!!!

      Back-yard mechanics........
      Huh, found an old post of mine, thought all the old stuff had disappeared. Date indicates that it was originally posted within a year or two of my first being a GSR member.

      Comment


        Nothing today. That will change tomorrow though. On the 1 hour drive to look at it I told myself I wasn't going to buy it but it turned out to be a bit better than expected, when I seen the headlight I had to have it. Says it was running but had an electrical issue.
        First step will be verifying crankpin phasing I guess. If that checks out I'll do a quick valve set, then cold compression test and decide where to go from there. Only 35,000 miles so we'll see. It's an 82 1100E for those without Psychic powers, there is a mint one about 30 minutes away that just came up for sale and I know it would be cheaper to just buy that one but I'm just stupid apparently.
        Even if the crank is good I would like to get it welded if I can find someone to do it. No luck checking today, hopefully I can find someone in B.C. or Alberta. suzy.jpg
        Last edited by Big Block; 03-07-2024, 02:22 AM.
        1986 1150EF
        2008 GS1250SEA

        Comment


          Crank welding is kinda overblown. Unless you are looking to get big power (140+) and drag race it. I have an '80 1100e drag bike that has broken a lot of stuff but not a crank.
          sigpic
          09 Kaw C14 Rocket powered Barcalounger
          1983 GS1100e
          82\83 1100e Frankenbike
          1980 GS1260
          Previous 65 Suzuki 80 Scrambler, 76 KZ900, 02 GSF1200S, 81 GS1100e, 80 GS850G

          Comment


            I'm back in carb hell, agreed to help a friend get his '80 XS1100 Midnight Special on the road, I had gone through these carbs over the winter, I finally have the bike in hand to install them on and see how it runs. Well, it floods out in like 10 seconds of running, just dumping fuel like crazy. This is after passing a leakdown test on the bench just fine mind you. Well, I pulled the identical '80 BS34s off my '78 XS1100E to compare and also to tackle some low-end richness that bike had still been dealing with. Better hope I sort this out or else you guys are gonna see me down at this year's Indiana rally on my 800lb Voyager!!


            IMG_2537.jpg
            Attached Files
            Previous GS fleet: '78 1000C, '79 750E, '81 650G, '82 1100G, '81 1100E
            Other rides: '77 XS500C, '78 XS1100E

            Comment


              Finished mocking up the basketcase I bought Wednesday. Much better than expected luckily. Only missing the side covers and 2 handfuls of fasteners. Also the engine checked out great, so I'll just install valve seals and a few gaskets and it will be ready to go. Now the ugly part, tear it all back down and clean and paint everything. Looking forward to assembling everything again but clean. 1100e mock.jpg
              1986 1150EF
              2008 GS1250SEA

              Comment


                Front and rear suspensions are clean and back on. 1 carb and the front M/C screw were going to fight me but Mr. Lincoln fixed that in short order. Waiting for 5 shipments of parts all due to arrive next week, have to order 3 more bits I think. No rush as the Honda is itching to go anyway but I should have this riding in a month or two at the most. 1100eh2.jpg
                1986 1150EF
                2008 GS1250SEA

                Comment


                  Ha, ha. Checking stuff while waiting for parts, So I have to source another darn clutch hub. One on the 1150 was cracked, this one a previous owner let nut get a bit loose and the splines are NG. Probably would have been okay for a while but knowing it is on it's way out I can't let it be. another clutch hub.jpg
                  1986 1150EF
                  2008 GS1250SEA

                  Comment


                    Originally posted by gtem View Post

                    Retrosteve are you referring to the custom "GSF1200ST" that Ken's head mechanic put together? '79 GS1000 frame married to Bandit monoshock, front axle, etc and a 1216cc kitted black painted GSXR 1110 motor?
                    Hello , it could be that one . Is there anyway the pictures of that bike could be posted on here , it would be good for reference to replicate

                    Comment


                      Valve seals finally arrived so I spent a few hours fabbing up a left and right spring compressor. I'll change the seals Friday and then I can install the engine into the frame finally. valve seal fun.jpg
                      1986 1150EF
                      2008 GS1250SEA

                      Comment


                        Engine in and the exhaust affixed to the E. The wait for parts continues. ehexhaust.jpg
                        1986 1150EF
                        2008 GS1250SEA

                        Comment


                          Fitted sequential led indicators . Still got the original big chrome ones but they need re chromed

                          Comment


                            Finally got this thing running like it should, last little fix is replacing the rear caliper piston, it's too badly pitted to reuse, sourced a new stainless replacement with new seal. Hauling it out to my buddy at the end of this week hopefully.

                            IMG_2630 (1).jpg
                            Previous GS fleet: '78 1000C, '79 750E, '81 650G, '82 1100G, '81 1100E
                            Other rides: '77 XS500C, '78 XS1100E

                            Comment


                              Got the first coat of primer on today after 2 lovely days of sanding. Final parts to get it running are 1 week away so I might get the colour on before they arrive with any luck. So I hope to hear it running with a week or 2. 1100 sandy.jpg
                              1986 1150EF
                              2008 GS1250SEA

                              Comment


                                I raised the rear ride height by 4mm on my 04 gixxer track bike to see if it'll quell the bizarre tire wear on the dunlop q5s.
                                On 3/17/24, I had my first track day get-off, after 12 years of riding the Ridge Motorsports Park. 7 years on the Kat & the rest on the gixxer.
                                The back end just went away on a banked left hander with no warning. My guess is that I was at or near full lean with neutral throttle, not putting enough drive force into the rear tire.
                                The tire was near done, but had rode a set longer with no issues. Gonna try some Pirelli's next.

                                20240320_124322 by Carter Turk, on Flickr

                                20240405_154032 by Carter Turk, on Flickr
                                GS\'s since 1982: 55OMZ, 550ES, 750ET, (2) 1100ET\'s, 1100S, 1150ES. Current ride is an 83 Katana. Wifes bike is an 84 GS 1150ES

                                Comment

                                Working...
                                X