Announcement

Collapse
No announcement yet.

Gs850g vs 650g

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Gs850g vs 650g

    I've owned two Gs650s and thinking of buying another have one in mind . I also know where there's a nice 850 . Anyone owned both and can tell your opinions on the differences ?

    #2
    The 850 is much larger and heavier. The engine is super smooth, as is the ride. Power to weight ratio in favor of the 650. The 850's are known to regularly run to 100,000 miles with decent care. The 650's are not problematic per say but overall not as durable.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      We have had the "L" versions of both bikes. Same year, too. You can click on the links in my sig to see them.

      As Nessism says, they are both good bikes, but are about as different as night and day. According to published specs, the dry weight on the 650L is 466 pounds. The 850L is 557 pounds. Despite the substantial difference in engine size (673 vs. 843), the 650 engine produces 72 hp, the 850 produces a whopping 78.

      As far as size, the 650 has a wheelbase of 57.1", the 850 is 58.7". There is a little more difference in the overall length, the 650 is 85.8", the 850 is 88.0". The numbers aren't all that different, but the 850 really does feel like a much bigger bike.

      Which one would interest you would depend a lot on how you plan to use it. If you want a canyon carver, the 650 is great, but is a little 'nervous' when riding straight at freeway speeds. The 850 feels much more solid on the freeway, making it a good touring bike, but is still nimble enough for all but the most-dedicated peg scrapers.

      All of this has been assuming that you are looking at a shaft-driven 650. The chain-driven version is a bit lighter at about 450 pounds. It also has the advantage of being able to change final drive ratios easily.

      The 850 engine has more torque, and produces its peak at a lower RPM. The 650 is about 42.5 lb-ft @ 8000 RPM, the 850 is almost 48 lb-ft @ 7500 RPM. Doesn't sound like much, but makes for more-relaxed cruising at highway speeds where the engine is turning about 1000 fewer RPM.

      The frame is considerably larger on the 850. It is the same frame that is used on the 1000G or 1100G, which makes it easier to work on. The larger frame gives a lot more room if you plan on carrying a passenger.

      As I said earlier, it all depends on what you want to do with the bike.

      .
      sigpic
      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
      #2 son: 1980 GS1000G
      Family Portrait
      Siblings and Spouses
      Mom's first ride
      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
      (Click on my username in the upper-left corner for e-mail info.)

      Comment


        #4
        I will mainly be riding 2up with my wife . One of the 650's I owned had the full Vetter package . It did fine two up I also just found a 850gl for sale need to go look at them .

        Comment


          #5
          I use my 850gl riding 2up with my wife quite a bit. It does a very good job.
          https://drive.google.com/open?id=0B9zH8w8Civs8ejBJWjdvYi1LNTg&resourcekey=0-hlJp0Yc4K_VN9g7Jyy4KQg&authuser=fussbucket_1%40msn.com&usp=drive_fs
          1983 GS750ED-Horsetraded for the Ironhead
          1981 HD XLH

          Drew's 850 L Restoration

          Drew's 83 750E Project

          Comment


            #6
            If you are planning on 2-up riding, and both of you are large enough to cast a shadow, the 850 will be a better choice.

            .
            sigpic
            mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
            hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
            #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
            #2 son: 1980 GS1000G
            Family Portrait
            Siblings and Spouses
            Mom's first ride
            Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
            (Click on my username in the upper-left corner for e-mail info.)

            Comment


              #7
              Originally posted by Steve View Post
              ...Despite the substantial difference in engine size (673 vs. 843), the 650 engine produces 72 hp, the 850 produces a whopping 78...

              The 850 engine has more torque, and produces its peak at a lower RPM. The 650 is about 42.5 lb-ft @ 8000 RPM, the 850 is almost 48 lb-ft @ 7500 RPM. Doesn't sound like much, but makes for more-relaxed cruising at highway speeds where the engine is turning about 1000 fewer RPM...
              Steve, I realize that those are the published numbers, but if the 650 actually makes more than 60hp on a dyno I'll eat my hat.
              The 850 numbers seem reasonable, but the 650 is way out of line. No way a mildly tuned, stock, 2 valve, air-cooled 650 is making 72@9000 rpm.

              To the OP:
              First, my bias. I hate the 850. Had one, wouldn't have another on a bet.
              That said, "2-up touring" tends to push people, for good reason, to larger bikes. Both for the extra power to deal with the weight, and because they are generally roomier.
              However, "touring" isn't the same for all people. If you and your wife aren't large people, and if your idea of touring is meandering on 2-lane roads and not covering big miles, then the 650 may well be the better choice. If none of that applies, then you'll likely be happier on the 850.
              '20 Ducati Multistrada 1260S, '93 Ducati 750SS, '01 SV650S, '07 DL650, '01 DR-Z400S, '80 GS1000S, '85 RZ350

              Comment


                #8
                There is no way I ride any distance 2 up on a GS650. I consider the GS850 adequate, with the 1100 being the ticket. I love my 850, but the top heavy is starting to bug me in my old age.

                Comment


                  #9
                  Originally posted by RichDesmond View Post
                  Steve, I realize that those are the published numbers, but if the 650 actually makes more than 60hp on a dyno I'll eat my hat.
                  The 850 numbers seem reasonable, but the 650 is way out of line. No way a mildly tuned, stock, 2 valve, air-cooled 650 is making 72@9000 rpm.

                  To the OP:
                  First, my bias. I hate the 850. Had one, wouldn't have another on a bet.
                  That said, "2-up touring" tends to push people, for good reason, to larger bikes. Both for the extra power to deal with the weight, and because they are generally roomier.
                  However, "touring" isn't the same for all people. If you and your wife aren't large people, and if your idea of touring is meandering on 2-lane roads and not covering big miles, then the 650 may well be the better choice. If none of that applies, then you'll likely be happier on the 850.
                  Weren't quoted HP numbers from that era at the crank rather than the rear wheel?
                  1983 GS 1100 Guided Laser
                  1983 GS 1100 G
                  2000 Suzuki Intruder 1500, "Piggy Sue"
                  2000 GSF 1200 Bandit (totaled in deer strike)
                  1986 Suzuki Cavalcade GV 1400 LX (SOLD)

                  I find working on my motorcycle mildly therapeutic when I'm not cursing.

                  Comment


                    #10
                    Originally posted by RichDesmond View Post
                    Steve, I realize that those are the published numbers, but if the 650 actually makes more than 60hp on a dyno I'll eat my hat.
                    The manufacturers' hp figures might be best understood as sales propaganda. Cycle World called them "manufacturers' claims." Car numbers used to be called gross, then more realistic figures in later years were called net.

                    My 11e was advertised as 108 hp. That's perhaps an estimate, but really just a claim of what it makes at the crank, on a workbench, without the stator (etc.) attached. The stock, rear-wheel dyno number is probably in the low 90's.
                    1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red

                    2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after.

                    Comment


                      #11
                      Originally posted by 1948man View Post
                      Weren't quoted HP numbers from that era at the crank rather than the rear wheel?
                      Depends on the source. Factory numbers are generally at the crank, but magazines back then (Cycle in particular, I think) had access to dynos that they could cobble together a connection to. The inertial drum dynos that you see now weren't around. I don't know the original source of either the 850 or 650 numbers that come up on an internet search.
                      The big thing to me is the disconnect between the 850 and 650 numbers, and how the 650 compares to a modern, water-cooled 650 like the SV or Ninja.
                      If you put a GS650 on a Dynojet dyno I'm guessing that you'd see something in the 55-58hp range.

                      None of this is meant to disparage the 650, I think it's a really cool bike, and if a clean "E" model came up for sale near me I'd be sorely tempted to buy it. I just didn't want the OP to think that the 650 had roughly the same power/weight ratio as the 850, it doesn't.
                      '20 Ducati Multistrada 1260S, '93 Ducati 750SS, '01 SV650S, '07 DL650, '01 DR-Z400S, '80 GS1000S, '85 RZ350

                      Comment


                        #12
                        Originally posted by RichDesmond View Post
                        Steve, I realize that those are the published numbers, but if the 650 actually makes more than 60hp on a dyno I'll eat my hat.
                        The 850 numbers seem reasonable, but the 650 is way out of line. No way a mildly tuned, stock, 2 valve, air-cooled 650 is making 72@9000 rpm.
                        Well, Rich, I have never been near a dyno with either of the bikes, but my "butt dyno" says there is definitely a difference in performance.

                        Regardless of actual HP numbers, the 91 pound difference in weight (closer to 100, if you include the extra gas capacity of the 850) makes a big difference.

                        There were times where I had the opportunity to get off one of the bikes and hop onto the other one, so it was a direct comparison. The 650 was definitely quicker, but was small enough that I would have a problem riding it for much more than an hour. The 850 was no slouch, it just doesn't have that 'snap' that the 650 has. Since we tend to ride more than 1/4 mile at a time, and our "lap times" are measured in hours (or days), not minutes and seconds, the 850 suits us a bit better.

                        I will definitely agree that the 850 is not for everyone, but there certainly are a BUNCH of them out there.

                        .
                        sigpic
                        mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
                        hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
                        #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
                        #2 son: 1980 GS1000G
                        Family Portrait
                        Siblings and Spouses
                        Mom's first ride
                        Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
                        (Click on my username in the upper-left corner for e-mail info.)

                        Comment


                          #13
                          Well I had the 650gl with the Vetter package Windjammer , bags and trunk ! I didn't have any problems riding it anywhere . Actually sold it to someone from this Forum several years ago . I had to make a new profile because I hadn't been on in awhile and my profile was gone . I have actually also owned a GS 1100g back in the 80's it was nice from what I remember .

                          Comment


                            #14
                            Pics of the bikes IMG_5083.jpg

                            Comment


                              #15
                              Here's the 650 IMG_5084.jpg

                              Comment

                              Working...
                              X