Announcement
Collapse
No announcement yet.
Rebuilt Carbs / Smoke From Exhaust
Collapse
X
-
Vrian_Sinth
-
Vrian_Sinth
Originally posted by londonboards View PostAre you sure the white smoke isn't steam.
In the damp climate of the UK, I literally have steam and water dripping out of mine. But it takes the exhausts and mufflers at least 10 minutes to heat up enough to evapourate it. Also why they always rot from the inside out.
Comment
-
Vrian_Sinth
Could be. I will be changing the oil again soon. I think the rings in cylinder 1 (closet to kick stand) are fouled up or stuck. I did a little research and ended up pulling the spark plugs on the two left cylinders. I put an equal mixture of acetone, marvel mystery oil and atf fluid in each cylinder. I'm going to let it sit a few days, change the oil and try again. Fingers crossed. A lot of people swear by this concoction, or similar ones. Cylinder one drains slowly, cylinder two isn't draining at all.
Comment
-
Originally posted by Vrian_Sinth View PostThanks for the advice. I live in a desert, so the humidity probably isn't an issue.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Originally posted by Steve View PostYou would be surprised how much moisture there is in the rather incomplete combustion inherent in a cold internal combustion engine.
.---- Dave
Only a dog knows why a motorcyclist sticks his head out of a car window
Comment
-
Vrian_Sinth
So I finished soaking the pistons, did an oil change and got it fired back up. It was still putting out a little smoke. I drove it around the block a few times and it's looking much better. Now I just need to get it all cleaned up and start riding. I'm super excited. Now I just need to diagnose why it struggles starting after sitting 24 hours. Thanks for all the comments. It's really much appreciated.
Comment
Comment