Gs 850 to 650 carb flanges 1982

[Sevtovit]

Quick question, does anyone know if the rubber carb flanges/boot from a gs850 will fit the intake/carbs on an 82 gs650. If not does anyone have the dimensions for the gs 850 flanges so I can reference.

Thanks a bunch!

[earlfor]

Quick question, does anyone know if the rubber carb flanges/boot from a gs850 will fit the intake/carbs on an 82 gs650. If not does anyone have the dimensions for the gs 850 flanges so I can reference.

Thanks a bunch!

The GS850 and the GS650 both use BS32mm carburetors, so the same rubber boot will fit either model carburetor boot to airbox. At the airbox end, I could not say more than probably. I am assuming you are asking about the rubber induction boot between the carburetor and air box. Not the manifold boot between the carburetor and engine.

http://gsarchive.bwringer.com/bikecliff/images/carbspec_float_height.html#A01

[Sevtovit]

Thank you for the link, very helpful. I do actually mean the flanges that connect the carbs to the intake manifold. To make a long story short the 850 flanges are much cheaper than the 650.

[Steve]

Yes, the 850 flanges are cheaper, but they won't fit the 650. They are a different length and have a different angle.

Check out Parts Outlaw for some of the best prices. Be sure to enter the promo code for cheaper shipping, too.

.

[hampshirehog]

No idea what they're like but these might be worth a punt:

https://www.amazon.co.uk/Manifold-Motorcycle-Carburetor-Interface-1981-1982/dp/B088H5375M/ref=sr_1_116?dchild=1&keywords=suzuki+carburetor+manifold&qid=1592422131&sr=8-116