Announcement
Collapse
No announcement yet.
GS1100G/GS850G: Same Fuel Tank?
Collapse
X
-
GS1100G/GS850G: Same Fuel Tank?
Howdy folks. The 82/83 GS850G fuel tank and the GS1100G tank look exactly the same, from what I've read they were the same size, both held 22 liters/5.8 gallons. So I'm just curious, are they in fact the exact same tank? And if so, is there any reason to think a GS1100G fuel tank wouldn't fit right onto a 82/83 GS850G frame? Theoretically it should be a straight swap, no?Last edited by RustyTank; 09-08-2020, 04:13 PM.Ryan
1979 GS850G - currently undergoing a major overhaul
1986 GSX-R750 - I'm figuring it outTags: None
-
It is a perfect fit, except for the paint.
For others that are reading this, the '80/'81 1000G and 850G are also interchangeable,
but the '80/'81 tanks do NOT swap directly with the '82/'83 tanks.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
Originally posted by RustyTank View PostI'm curious why Steve? Is it one reason, or several?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Originally posted by Nessism View PostI'm not Steve (obviously) but the answer is because they don't. Suzuki renovated the bikes in several ways for 1982.Ryan
1979 GS850G - currently undergoing a major overhaul
1986 GSX-R750 - I'm figuring it out
Comment
-
Tank bolt placement is the biggest reason, I think the petock location is slightly different, too.
Remember: I said they were not a DIRECT swap, meaning a simple remove and replace.
I didn't say it wasn't possible for someone with enough time, money and determination.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13969
- London, UK to Redondo Beach, California
The later tanks are a two bolt setup.. Aren't the earlier tanks a 1 bolt setup?1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
Comment
-
Yep, a single bolt, and it's horizontal, instead of vertical.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
For a minor thread detour, do ~all the GS tank with two vertical bolts share similar spacing between the bolts and up to the front cups? The tank on my recently acquired '81 GS550T is a two bolt variety. It holds gas, but is not great so I'm trying to decide to fix with paint or buy one in better condition. Visually it looks similar to an '83 GS450L tank from a past project.
The paint option isn't cheap when you add in primer, paint, and fuel proof clear coat to get something respectable.
Any options from other GS's wouldn't be a direct swap because the 550T is the rare variant with no fuel gauge and petcocks might be in different locations. Those diffs are manageable.Current rides: GS650L, GS550T, GL500, GL1100, Bonnie, Triumph Adventurer, Guzzi California
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
Originally posted by sacruickshank View PostFor a minor thread detour, do ~all the GS tank with two vertical bolts share similar spacing between the bolts and up to the front cups? The tank on my recently acquired '81 GS550T is a two bolt variety. It holds gas, but is not great so I'm trying to decide to fix with paint or buy one in better condition. Visually it looks similar to an '83 GS450L tank from a past project.
The paint option isn't cheap when you add in primer, paint, and fuel proof clear coat to get something respectable.
Any options from other GS's wouldn't be a direct swap because the 550T is the rare variant with no fuel gauge and petcocks might be in different locations. Those diffs are manageable.
Paint is not cheap, but it's money well spent if the vehicle is a keeper.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
Comment