I just picked up my first street bike about a month ago. 1980 GS550E. Seems to be completely factory. If you see something that isnt factory or is missing, would you mind letting me know?Has 7,800 original miles on it and is in pretty good condition. Cost $1,300. Now I've been spending my time checking out the forum and trying to figure out all the maintenance for it etc.
Announcement
Collapse
No announcement yet.
First Bike: Completely Factory 1980 GS550E
Collapse
X
-
First Bike: Completely Factory 1980 GS550E
Hey guys,
I just picked up my first street bike about a month ago. 1980 GS550E. Seems to be completely factory. If you see something that isnt factory or is missing, would you mind letting me know?Has 7,800 original miles on it and is in pretty good condition. Cost $1,300. Now I've been spending my time checking out the forum and trying to figure out all the maintenance for it etc.Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35601
- Torrance, CA
The seat cover and engine guards are not factory. Looks nice. Enjoy!Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
Nice cycle.. and welcome to the GSR.sigpic
When consulting the magic 8 ball for advice, one must first ask it "will your answers be accurate?"
Glen
-85 1150 es - Plus size supermodel.
-Rusty old scooter.
Other things I like to photograph.....instagram.com/gs_junkie
https://www.instagram.com/glen_brenner/
https://www.flickr.com/photos/152267...7713345317771/
Comment
-
SVSooke
An ad from back in the day.Nothing on yours I'd be to worried about,case guards are a good thing and the mirrors and seat cover look OK
Comment
-
Tenshots1
Thanks for the welcomes guys! I do think the mirrors are a factory option, as I have seen some model pictures with them. O well, this way I won't feel bad when I put my own parts on it. BTW, I was just down working on it, replacing the air filter that also looked original! While there, I was looking for the fuel pilot on the carbs. I was surprised to see no screws on the sides or underneath them. Then, when I look towards the front of the carb on the inside, I see some copper adjustment looking screws. This is the fuel pilot correct?
Comment
-
The mirrors are accessory, there were no 'factory options' for mirrors.sigpicSome of the totally committed probably should be.
'58 + '63 Vespa 150's' (London, GB/RI, US)
'67 X6 T20 ('67 Long Beach, Ca.- misty-eyed)
'71 Kaw. A1-ugh ('71 SF, CA- worked @ Kaw dlr)
'66 Yam. YL1('72 SF-commuter beater)
'73 Kaw. S2A-2Xugh ('73 SF-still parts slave)
'78 GS 750C ('77 SF-old faithful-killed by son)
'81 KZ 750E ('81 SF-back to Kaw. dlr)
'81 GS 650G ('08 back to NE&ME- (project)
'82 GS '82 (2) GS650GZ, L, Middlebury, G current
Comment
-
Originally posted by Tenshots1 View PostThanks for the welcomes guys! I do think the mirrors are a factory option, as I have seen some model pictures with them. O well, this way I won't feel bad when I put my own parts on it. BTW, I was just down working on it, replacing the air filter that also looked original! While there, I was looking for the fuel pilot on the carbs. I was surprised to see no screws on the sides or underneath them. Then, when I look towards the front of the carb on the inside, I see some copper adjustment looking screws. This is the fuel pilot correct?
Everything you need to know about carbs is here.
2@ \'78 GS1000
Comment
-
Tenshots1
Originally posted by steve murdoch View PostEverything you need to know about carbs is here.
http://www.mtsac.edu/~cliff/storage/...d_Tutorial.pdf
Thanks steve. I did a decent amount of searching around but did not yet stumble on this great bit of info.
Another super noob question that I would never make a thread for, but as long as your here: How do I adjust the bottom of my shocks? Do I need a tool for this?Last edited by Guest; 05-15-2015, 05:22 PM.
Comment
-
JEEPRUSTY
-
Tenshots1
Originally posted by steve murdoch View PostYou adjust the shock with a C spanner wrench. 6" long with a hook on the end.
There should be one in your bikes toolkit. They are cheap to buy if you don't have the kit.
Yu can do it with a metal punch and a hammer but it will mess up the collar.
Thanks steve. I do have the kit. I'll have to check out the parts inside
Comment
-
Chrome Options
Welcome!
What a nice bike! Seems like chrome headlights are the favorite option--my bike came with one but should have the black headlight.
Definitely find that spanner for your shocks. I replaced my chrome ones for solid black progressives and the spanner came with the pair.
Plenty of knowledge to soak up around here and many helpful members.
EdGS750TZ V&H/4-1, Progressive Shocks, Rebuilt MC/braided line, Tarozzi Stabilizer[Seq#2312]
GS750TZ Parts Bike [Seq#6036]
GSX-R750Y (Sold)
my opinion shouldn't be taken as gospel or in any way that would lead you to believe otherwise (30Sep2021)
Comment
-
DougMarshall
Bike looks in great shape! I just bought same 1980 gs550e month ago (not as pretty as yours) solid bike though. You'll find this Forum very helpful. Good Luck
Comment
Comment