Announcement

Collapse
No announcement yet.

New guy with a GS1150

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    New guy with a GS1150

    Hey guys I'm new to this site and wanted the say hey! I've been a Bike guy since I was little, Doing my own work is the only way to go! Just wanted to share a bit of my ongoing project I have now, it's a Gs1150 with a gsxr front end and gsxr rear swinger with a 5.5 wheel, Vance an Hines pipe powder coated black, 36mm rs flatslides, it's an ongoing project but I'm almost there here's some pics, I did a complete frame off restoration, had the frame powdered and i cleaned up the motor with new gaskets, new intake boots, I adjusted the valves, completely rebuilt the flatslides, dyna 2000 ignition and prob some stuff I'm missing
    Attached Files
    Last edited by Guest; 06-03-2015, 01:50 AM.

    #2
    Here's another
    Attached Files

    Comment


      #3
      This thread is worthless without a YouTube video of that engine running



      Welcome aboard, looks like you have been at this a while . You should put your location in your profiles so people have an idea from where you hail.

      Comment


        #4
        How many inches that swingarm extended?

        I'd like to hear what it sounds like also.

        You got one of them new-fangled tiny batteries, or it's just not installed when photo was snapped?
        Last edited by Rob S.; 06-03-2015, 10:10 AM.
        1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red

        2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after.

        Comment


          #5
          That's one long mother ... bet it goes down the strip at a fine clip.
          "Thought he, it is a wicked world in all meridians; I'll die a pagan."
          ~Herman Melville

          2016 1200 Superlow
          1982 CB900f

          Comment


            #6
            Welcome.....Whats the intended use for the bike? Drag race? Street? Both?
            I see a bit of 85 es paint. Any plans for the body work yet?

            Again, welcome and enjoy.

            Add-looking closer at the pics it seems that the coil locations would prevent a stock gas tank install so im guessing a body kit?
            Last edited by dorkburger; 06-03-2015, 10:48 AM. Reason: add
            sigpic
            When consulting the magic 8 ball for advice, one must first ask it "will your answers be accurate?"

            Glen
            -85 1150 es - Plus size supermodel.
            -Rusty old scooter.
            Other things I like to photograph.....instagram.com/gs_junkie
            https://www.instagram.com/glen_brenner/
            https://www.flickr.com/photos/152267...7713345317771/

            Comment


              #7
              Well I'm trying to post a vid on YouTube of it running but I seem to be messing something up but I'll keep trying, I'm using a 1st gen gsxr swinger stretched 8", I intend on it being my weekend cruiser and maybe see a couple weekends at the local 1/8mi if I ever muster up the courage.

              yea your right it's blue and white I've got the stock tank also but it's rusty inside and that's my next battle, I wanna stick to the OEM blue and white bc I just love the look of these things

              oh and the coils are just resting on the frame, I haven't had time to fab up some brackets/spacers

              hopefully I'll get this vid posted so you can hear it, def loud but man it sounds mean

              Comment


                #8
                Welcome to the site. Looks to be a sweet project you have going on there. I love the 1150's. Please update your location so we know where you're from...
                '83 GS 1100T
                The Jet


                sigpic
                '95 GSXR 750w
                The Rocket

                I'm sick of all these Irish stereotypes! When I finish my beer, I'm punching someone in the face ! ! !

                Comment


                  #9
                  Ok I'll update my location, I tried putting my info in my signature but it's not showing up...

                  edit: there it is!!

                  Comment


                    #10

                    heres the link hope you likey

                    Comment


                      #11
                      Sounds very nice. Sounds...proper.
                      Nothing like the sound of a big in-line four through a four-into-one.
                      1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red

                      2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after.

                      Comment


                        #12
                        Central Illinois, eh? I am from Oak Forest. There are a handful of members here from the area as well...
                        '83 GS 1100T
                        The Jet


                        sigpic
                        '95 GSXR 750w
                        The Rocket

                        I'm sick of all these Irish stereotypes! When I finish my beer, I'm punching someone in the face ! ! !

                        Comment


                          #13
                          Yea I'm in the champaign/Urbana area, I rarely see these ole' GS's anymore, maybe one day I'll make it up there and cruise lake shore drive...always wanted to do that

                          Comment


                            #14
                            That looks and sounds brutal. I see you're veering away from the stock set up?
                            The continuing renovation of a GS850L

                            Comment


                              #15
                              Update!!
                              had a good friend throw some fresh paint on my plastics and paint the wheels black, he did an excellent job! Hopefully here in a couple days I'll post pics of it actually on the ride! Enjoy!
                              Attached Files

                              Comment

                              Working...
                              X