Announcement

Collapse
No announcement yet.

New GS owner, 79 Terry Vance GS1000

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    G is never chain. Always shaft.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #17
      Very cool, and sure to be a most collectible GS, given it's marketing history and (very) limited issue numbers. Good luck with getting her sorted.
      '80 GS1000ST
      '92 ZX-11
      Past rides: '79 GS1000SN, '84 GPZ900R

      http://totalrider.com/

      Comment


        #18
        I love this bike!

        Comment


          #19
          I remember one of these coming up on ebay a few years back that belonged to a lady she was getting rid of it, it had very few miles and I thought was near mint with all the papers and books, that I think I read was a competition giveaway.

          The early clutch baskets used to be weak, I had one that cracked through one'v the rivets and exploded through the bottom case that was patched and welded up ok.
          sigpic

          Don't say can't, as anything is possible with time and effort, but, if you don't have time things get tougher and require more effort.

          Comment


            #20
            Did the clutch basket change over the years? If so, I'm unaware of it.

            A very worthwhile mod for those bikes is the addition of heavy duty clutch hub springs and backing plate. In addition to keeping the hub from blowing up it also improves the smoothness of the clutch engagement.
            Ed

            To measure is to know.

            Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

            Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

            Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

            KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

            Comment


              #21
              Originally posted by Nessism View Post
              Did the clutch basket change over the years? If so, I'm unaware of it.

              A very worthwhile mod for those bikes is the addition of heavy duty clutch hub springs and backing plate. In addition to keeping the hub from blowing up it also improves the smoothness of the clutch engagement.
              I had the basket in my 1000ST replaced under warranty which I sent to V&H to have it modified. It lasted for years before it, once again, became noisy. The BEST solution would've been to have a Falicon billet basket installed. According to the service manager at my local dealer at the time the later units were a little more robust than the earlier units. But they still rattled regardless.

              Comment

              Working...
              X