.png "Powered by vBulletin")
Well I've been having my issues with mirrors on the FZ. The stock ones, mounted on the fairing don't extend out far enough to see anything other than my shoulders. After four or five attempts at making extenders, I finally have some that work somewhat. At certain speeds and revs, I can see fairly clearly. At others, its just one big blur.
Now what makes it interesting is that I put on some $3 blind spot mirrors to augment what I see and very strangely, they do not go blurry at any speed.
Now why is this I ask myself. The stock mirrors seem fine, the glass is firmly fixed and the joints are quite tight and yet there is still serious movement.
Now I read somewhere about drilling the "case" holding the glass and filling it with bbs or even silicone calms down the shakes but I have no experience with this and as I only have one set of mirrors I don't want to bugger them.
Anyone have any knowledge or experience to share?
Cheers,
Spyug
Now what makes it interesting is that I put on some $3 blind spot mirrors to augment what I see and very strangely, they do not go blurry at any speed.
Now why is this I ask myself. The stock mirrors seem fine, the glass is firmly fixed and the joints are quite tight and yet there is still serious movement.
Now I read somewhere about drilling the "case" holding the glass and filling it with bbs or even silicone calms down the shakes but I have no experience with this and as I only have one set of mirrors I don't want to bugger them.
Anyone have any knowledge or experience to share?
Cheers,
Spyug
Comment