Announcement
Collapse
No announcement yet.
1981 Kawasaki KZ750 Resurrection
Collapse
X
-
Originally posted by Nessism View PostThe speedo I bought has a green bezel so the gauges don't match. Guess I'll have to open my new speedo and paint the bezel. It's just that I've got heartburn opening a NOS gauge that I paid so much for.
Leave a comment:
-
Originally posted by Killer Canary View PostWhat does the headlamp warning lamp do?
I don't care that much about this feature, but it's a nice to have. The 1980 MY E1 bikes don't have this feature. They have the "oil" warning lamp in the tach instead. My bike has the oil light in the gauge cluster.
Leave a comment:
-
One of my last projects with this bike was to update the gauges. As shown earlier in the thread I cleaned up the housings and the gauges looked nice and all, however, the needles sort of wobbled around more than I liked. Did a deep dive on gauge part numbers and got all kinds of confused. Kawasaki used a couple different part number gauges which threw me for a loop. The 550's used the same size gauges too which increased confusion.
In the end I've come to realize that the E2 bikes use a somewhat unique tach that has the "headlamp" warning light built in. This gauge also uses a black gauge bezel inside the housing. The speedometer for my bike also has a matching black bezel. I found a NOS tach which is correct but couldn't find a speedo. The speedo I bought has a green bezel so the gauges don't match. Guess I'll have to open my new speedo and paint the bezel. It's just that I've got heartburn opening a NOS gauge that I paid so much for.
Sorry for all the photo glare...
Leave a comment:
-
Guest repliedOK I only really know what mine has.Good luck with the choice.
Leave a comment:
-
Originally posted by SVSooke View PostIt's not an 82 GPz speedo. Speedo tach and other bits are all in one pod.
Leave a comment:
-
Guest repliedIt's not an 82 GPz speedo. Speedo tach and other bits are all in one pod.
Leave a comment:
-
Well, it seems that Kawasaki's part system is even more screwed up than Suzuki's. They show two different part number speedometers for my bike as still available, but neither are.
This guy is selling two speedo's of the (supposedly) proper part number, only the trip reset knob looks wrong...http://www.ebay.com/itm/150719293323...%3AMEBIDX%3AIT I tried to message him and ebay said I can't send this seller any messages. What's up with that? Big red flag. I suspect that gauge would be fine, only it maybe be a GPz variant. Thing I don't like though is that it looks to have been bouncing around in an open tray instead of being sealed up safe in a proper box. Big money gamble. Gonna have to pass.
Leave a comment:
-
Guest repliedStunning!!!!
Leave a comment:
-
I've done a deep dive on Kawasaki gauge part numbers and learned a lot...but not everything.
If you look at the face of the speedo you can see 1154 printed near the bottom. That's the part number suffix...in some cases. Kawasaki had two different part number speedo's for this bike, 25005-1154 and -1066. -1066 was used on the KZ550 too, and the same speedo with a larger trip meter knob was used on the GPz550 under a different part number. It's a game figuring out what gauge fits what.
P1010557_zpse5248f97 by nessism, on Flickr
Last edited by Nessism; 07-31-2017, 01:14 AM.
Leave a comment:
-
Despite my best effort while restoring the gauges on this bike the needles warble around some in use. Found a NOS tachometer off ebay for a great deal so I snatched it up but haven't been able to find a deal on a speedometer. In fact, a lot of guys selling old parts on ebay want more money for them than you can get the part for from Partzilla or similar. Amazing. At any rate, I didn't want to bust down the cluster to install the tach until finding a speedo, and since I couldn't find a cheap speedo I just popped and ordered one from Partzilla. Hopefully it's truly available and not a mistake.
Leave a comment:
Leave a comment: