HF Utility Trailer For My "T" GS750TZ

[GSXR7ED]

It's taken several months but I finally got my trailer unfolded, assembled and out from the garage. This was a clearance/level test; tongue resting on the ball with 4 inch drop.



Now, to start working on my bike...geeze, let's wait another 7 months (speaking to myself).


Ed

[chuck hahn]

I use eye bolts and thick fender washers to fasten the decking to my 4X8. One on each corner and one at the middle. Holds the deck on and double as tie downs. Used it yesterday to move a bike.

[Nessism]

If you cut the platform board into two half's you can still fold up the trailer for easier storage. The easier part is debatable though since it takes considerable muscle to stand up and fold the trailer. I've got mine stored that way, tied to a tree so it doesn't topple in the wind.

Regarding the trailer in general, it works well but bounces like heck when unloaded. I've often considered finding a large water container that could be used to weight the thing down for unladen trips. Where the water could be dumped before loading a bike to bring home or similar. Water is like gold in my neck of the woods though so nixed that idea for that reason.

[GSXR7ED]

Collapsible Trailer

If you cut the platform board into two half's you can still fold up the trailer for easier storage. The easier part is debatable though since it takes considerable muscle to stand up and fold the trailer. I've got mine stored that way, tied to a tree so it doesn't topple in the wind.

Regarding the trailer in general, it works well but bounces like heck when unloaded. I've often considered finding a large water container that could be used to weight the thing down for unladen trips. Where the water could be dumped before loading a bike to bring home or similar. Water is like gold in my neck of the woods though so nixed that idea for that reason.

I like the fold-ability of this trailer. Since space is a premium in my garage and the tongue comes within inches of the ceiling, it gives me room to park both our cars in the garage and still have room for my "T". Man, my garage does not look like that anymore...it's cleaner!

It's a pain to lug the 4X8 into the shed where my other "T" is parked on center stand but I manage it.




Ed

[Nessism]

Sorry, but confused by your statements. To be clear, you can fold the trailer with the plywood attached, you just need to cut the 4x8 in half. Wouldn't that be easier? Oh, and the towing bars fold back too so they don't have to brush up against your ceiling.

[GSXR7ED]

Bolt On!

I use eye bolts and thick fender washers to fasten the decking to my 4X8. One on each corner and one at the middle. Holds the deck on and double as tie downs. Used it yesterday to move a bike.

That'll work!

I painted my 4X8 with some grit material in the paint. I used bolts (don't remember what size) and washer to hold the wood piece in place...3 in the front and 2 in the back. I also keep the plywood in my shed so the elements don't erode it.

[RichDesmond]

On the lowering bit, doesn't putting the axle on top of the spring cause it to hit the frame rail on a big bump?

[GSXR7ED]

Clearance

On the lowering bit, doesn't putting the axle on top of the spring cause it to hit the frame rail on a big bump?

I just took this pic to verify clearance. There's at least 2-3 inches and I doubt the frame will bounce that much on that spring. Thanks for asking!



Ed

[GSXR7ED]

Sorry, but confused by your statements. To be clear, you can fold the trailer with the plywood attached, you just need to cut the 4x8 in half. Wouldn't that be easier? Oh, and the towing bars fold back too so they don't have to brush up against your ceiling.

Sorry...didn't read your response right away. I'm sure I could saw the 4X8 piece in half like you suggested, I just haven't done so. That would add additional weight to an already heavy foldable trailer. Not sure about the towing bars folding back? Since there is 1-2 inches of clearance, I won't be folding the towing bars.


Ed