Goin' German and Italian for a change

[nvr2old]

A couple of good friends of mine have these projects and asked if I would do their paint. Both are return customers from when I was doing it to survive. Tobin who owns the BMW was the guy who sold me the 400F for such a rippin' deal, how could I not try to pay back that generosity. Simon has a handful of other Guzzi's. Found this one leaning up against a fence post sitting outside for about 15 years, blasted with a shot gun..oh, the humanity..thus the NOS tank. He has the bike done and is just waiting for me..

The BMW has a dent right above the emblem..argh..worse place possible as it extends into the recess. Will be a bear to get right. The dent below at the bottom front part of the tank will be easier.

This is how far he took it before handing it off to me.

1 by Larry Pearson, on Flickr

The Guzzi tank is beautiful, the side covers..not so much.

2 by Larry Pearson, on Flickr

3 by Larry Pearson, on Flickr

4 by Larry Pearson, on Flickr

Every ounce of paint has to go. Took me 3 hrs. to grind and sand it all off. Actual "tins" with doors, hinges, lips, recesses..all has to go. This is where having a sand blast cabinet would have almost paid for itself..what a pain.

5 by Larry Pearson, on Flickr

7 by Larry Pearson, on Flickr

Had to give the tank some tooth before the epoxy primer. But zero dents..ahhh.

8 by Larry Pearson, on Flickr

A little mud-slingin' to get the stock "Y" shape body lines again.

10 by Larry Pearson, on Flickr

Looking much better.

12 by Larry Pearson, on Flickr

[nvr2old]

Some primer..

13 by Larry Pearson, on Flickr

Not bad for 5 hrs. of work. Next week block sanding and priming again.

14 by Larry Pearson, on Flickr

15 by Larry Pearson, on Flickr

This bike is going to be that really cool stock green they came in. A 2013 Kia Soul "Alien Green" is a very close match. I'll use that. $165 a pint..ouch. The Bimmer is going back to black with factory-style pin stripes. Wish I could hand-paint them like they did at the factory, but they'll look fine sprayed.

[steve murdoch]

Metal body parts, what a novel concept.

Last year i visited a vintage BWM restorer near me and the pin-striping and paintwork was spectacular.
I wouldn't imagine the "smoke" on the R90S models can be easy?

[alke46]

Subscribed and trying to act like a sponge. I bet that Guzzi will be a real head turner.

Thanks for sharing with us.

[nvr2old]

[QUOTE=steve murdoch;2469221]Metal body parts, what a novel concept.

Last year i visited a vintage BWM restorer near me and the pin-striping and paintwork was spectacular.
I wouldn't imagine the "smoke" on the R90S models can be easy?[/Qcan

I painted an R90S once. It was a dark silver with the fogged black effects. It was scary because 1 mistake meant starting over. It looked so cool when it was done. I was really proud of it. Wish I would've taken pics, but it was a while back.

[pete]

Tuning in for sure Larry, I like seeing your work in action. That's pretty funky the Guzzi side covers act as boxes as well, very handy!

[portdave]

Love the pictures. Thanks for sharing. You are amazing.

[nvr2old]

Here's what these two bikes will look like. The V7 Guzzi will be this color but has tank decals instead of emblems, and the BMW in the pic is a 600, but almost exactly the same otherwise. I like em both, but the Guzzi draws me in a bit more.

guzzi-right by Larry Pearson, on Flickr

68b569cc864031235b6ed05f0d2be67c_preview by Larry Pearson, on Flickr

[srsupertrap]

The magic has begun . . . subscribed

[pete]

Yep, definitely like that V7 Larry!

[nvr2old]

Just for fun..imagine owning a 1983 Honda CX650 Turbo since new, and keeping it in pristine condition for 35 years..35,000 miles w/o a scratch. Go to take a ride on it, put it on the side stand on your course gravel driveway..walk away to open the gate, the side stand sinks into the gravel..and, well...

TurboThen by Larry Pearson, on Flickr

Exactly what happened to my best friend. Ouch. What a pi$$er. He's a certified Honda Tech and for years has gotten all my bikes (including the S) running for me. It was my pleasure to help him out. Maybe the most expensive pint of paint ever. The blue cost $300, the pearl white 2-stage was another $300. The red stripe (part of a $70 kit) is a factory decal..why Honda did it that way is a mystery. But it turned out beautiful. Whew. Such a cool bike, and it's worth a ton of money these days.

TurboNow by Larry Pearson, on Flickr

[pete]

Wow Larry that would be a nightmare for any owner! Top job as always though!

That paint's expensive alright! I thought my PPG 13L Bright Silver Metallic wasn't cheap at $120 for 500mL's (a pint) but that ain't nothing...

[nvr2old]

Thanks, Pete. I continue to be blown away how much quality materials cost. The thing about this fairing was, it needed to blend into the stock factory finish of the rest of the bike..so no cut and buff. I was able to spray the clear in a way that still had a bit of orange peel to it and still be smooth. That's where having access to a downdraft booth (no dirt) and then a 150' baking process helped a lot. Along with matching the colors, it really has an "untouched" look to it, and that's what we both wanted.

[pete]

All I can say is you did good Larry, that certainly does blend in, top job as always

A downdraft booth would be fantastic, but a bit beyond my abilities to do in my shed Mind you a fan setup with more CFM would be a 100% improvement over how it is at present.

[nvr2old]

I know what you mean, Pete. For years I have used a modified garage with a window fan. It wasn't until the last couple of years did I have a really nice heater. I'm so grateful to have this booth and this shop at my disposal. They laughed at me using an electric drill with a grinder pad. Jeez, Larry..use these air tools, dude.