Announcement

Collapse
No announcement yet.

Nissin 5/8 Master breakdown

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Nissin 5/8 Master breakdown

    Hello. So I have a 5/8 master I am planning on mounting when I install my individual brake lines(on the Daytona), currently the elbow on the master that connects to the reservoir is facing the wrong direction. I have removed the rubber cover and snap ring but cannot get the elbow out of the master.
    It is suppose to just pull out.



    Any ideas?

    #2
    There's an O ring on the round part of the elbow - they do get stuck in there..I'd try a little warmth from a heat gun and a penetrating fluid too.
    Once you can turn it, you should be able to remove it - and fit a fresh O ring....

    Comment

    Working...
    X