.png "Powered by vBulletin")
I have a couple sets of cam sprockets for my bike one set off an 1100 katana and another set of my '89 Katana 750
DSCF3791b.jpg
As you can see the 750 sprockets have the bolt holes in much different places than the 1100 ones. The 750 cams have a much smaller duration and lift than the 1100 ones which may be why the sprockets are different. I am 90% sure I would use the 1100 ones but I want other ideas. The cams I am using are an '88 gsxr750 intake cam and an '87 gsxr 1100 exhaust cam.
I also have APE adjustable sprockets but I dont really want to deal with all the hassle of degreeing them, especially because the engine is in the bike and the frame is in the way making degreeing harder.
Either way I want to try to get a bit more mid and low end out of this short stroke 750.
DSCF3791b.jpg
As you can see the 750 sprockets have the bolt holes in much different places than the 1100 ones. The 750 cams have a much smaller duration and lift than the 1100 ones which may be why the sprockets are different. I am 90% sure I would use the 1100 ones but I want other ideas. The cams I am using are an '88 gsxr750 intake cam and an '87 gsxr 1100 exhaust cam.
I also have APE adjustable sprockets but I dont really want to deal with all the hassle of degreeing them, especially because the engine is in the bike and the frame is in the way making degreeing harder.
Either way I want to try to get a bit more mid and low end out of this short stroke 750.