Announcement
Collapse
No announcement yet.
Ultrasonic cleaner solutions
Collapse
X
-
Hmmm, Interesting. Though I doubt it would ignite it. I have to think that they HAVE to caution it because of ANY possibility of it. A light switch is an ignition source. I'm not saying I am GOING to use Acetone, in a sonic cleaner, nor am I saying anybody should. Acetone in a bucket overnight does a fantastic job on it's own. The Ultra-Sonic Cleaners with heat, (that I have seen) have a temp adjustment dial. With something as strong as an Acetone, you really wouldn't need heat. Either way, if I ever get one, I would use it outside, and not worry much about it...'83 GS 1100T
The Jet
sigpic
'95 GSXR 750w
The Rocket
I'm sick of all these Irish stereotypes! When I finish my beer, I'm punching someone in the face ! ! !
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35601
- Torrance, CA
Don't forget that with the CV carbs there are rubber throttle shaft seals that don't get removed. Regular carb dip can damage the seals, but acetone would be even worse.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Originally posted by Nessism View PostDon't forget that with the CV carbs there are rubber throttle shaft seals that don't get removed. Regular carb dip can damage the seals, but acetone would be even worse.'83 GS 1100T
The Jet
sigpic
'95 GSXR 750w
The Rocket
I'm sick of all these Irish stereotypes! When I finish my beer, I'm punching someone in the face ! ! !
Comment
-
So I have the first set for the Ultrasonic Cleaner going with the heat feature on. Timer can be set for a max of 480 SECONDS ( 8 minutes ) per cycle. I aired to the side of caution and am using a hot dose of dish soap and water. Now the question is just how many 8 minute runs do you guys think is enough to get the tiny passages adequately cleaned? I was thinking 3 cycles to start with.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.
Comment
-
On my VM carbs that had been sitting for about 3 years it took about 5-6 8 minute cycles using a heated Pine-Sol solution. But they were really gunked up!Ron
When I die, just cremate me and put me in my GS tank. That way I can go through these carbs, one more time!https://www.thegsresources.com/_forum/core/images/smilies/cool.png
1978 GS750E - November 2017 BOTM
1978 GS1000C - May 2021 BOTM
1982 GS1100E - April 2024 BOTM
1999 Honda GL1500SE
Comment
-
Chuck, that sounds about right to start, more time doesn't hurt obviously, how hot did you set the heater?
I use 50C (122F)
The water does matter, especially if there is a lot of minerals in it, I always use distilled water, Walmart about $2.00 for a gallon.
David.2018 Honda Africa Twin AS
2013 DR 650 Grey, sold 1981 GS 650E Silver,
1980 GS1000ST Blue & White, X2
2012 DL650 Vstrom Foxy Orange, in storage
1981 CT110 X2 "Postie Bikes" Gone to a New Home.
2002 BMW 1150 GS Blue & White - Sold
1975 BMW R90/6 Black - Sold 1984 GS1150EF Sold
1982 BMW R100 Africa trip, Stolen - Recovered- Sold
1977-1980 Suzuki GS550, GS1000E, GS1000S GSX750, GSX1100,s
Hondas ST90, CR125 CB175 , CB350 CB750, NSU Quickly, Yamaha RD's 350/400,
Comment
-
No temp adjustment on this tub. I would need to find a thermometer to know its actual setting.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.
Comment
Comment