.png "Powered by vBulletin")
What size nipple do I need for the GS450 carbs? I am going to build a sync tool.
-
-
carb
im not sure of the size but its cheaper and easier just to buy one. i got a carbtune pro just the other day and the color tune set too. if all you need is the 2 cylinder meter look on ebay i seen some for $40 bucks in the us. -
I made a sync tool once and used these http://www.motionpro.com/motorcycle/partno/08-0218/.
I didn't have very good luck with the whole contraption. The brass fittings get hot and the rubber hose starts slipping off when the bike gets warm. I ended up buying a Morgan Carbsync which comes with plastic fittings that are made to resist high heat.Comment
-
You need 5mm adapters.
Good luck with building one.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
I say +1 for the Carbtune Pro. I got the 4 cylinder one for a Christmas present and it's awesome.1982 GS450E - The Wee Beastie
1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020
sigpic
450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh
Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11Comment
Comment