1982 GS450TZ - stalls when hot

[Showdown]

Hey Pete do you have a thread/page on your Dynatek kit?

[pete]

Hey Pete do you have a thread/page on your Dynatek kit?

Should be some stuff towards the end of this one:

http://www.thegsresources.com/_forum/showthread.php?t=171781

And there's a bunch more photos here:

http://s594.photobucket.com/albums/tt26/starpoint73/GS450/Dynatek/

Any questions feel free to ask

One day when I'm motivated I'm thinking of putting a "how to" thread up...

[Showdown]

I'm sure that'd be a HUGE resource!

But in terms of fabbing... from what I can tell all you had to do was make a spacer, grind the plate for clearance, and do some splicing?

Thanks

[pete]

I'm sure that'd be a HUGE resource!

But in terms of fabbing... from what I can tell all you had to do was make a spacer, grind the plate for clearance, and do some splicing?

Thanks

Yeah pretty much, it was mostly a bolt in. The hard part was the initial communication with Dynatek and figuring out if it would even work. Once I'd gotten some part number research done from the parts fiche the rest was easy. The guys at Dynatek were extremely helpful too.

Oh, there's also the extra oil pressure switch wire too.

And in hindsight, grinding is probably unnecessary too, just look closely at the clearance between the plate and the oil pressure sensor terminal and make sure they won't touch.

The other thing on the 450 is the harness is probably about 2 inches shorter than I would've liked which is why I made up the little mini harnesses to hang off the coils.