Announcement

Collapse
No announcement yet.

450 engine rebuild

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #46
    Originally posted by Big Rich View Post
    Pretty much any GS front end is a bolt up job. I put a twin caliper GS650 front end on my GS450s. It's about 1.5" longer than the stock front end.
    I'd be interested in this at some point. Any ideas on how much you spent on that conversion all together? Could you PM me with any details you have on that project?

    Comment


      #47
      Originally posted by phillipjohnw View Post
      Does anyone know how much exhaust can be chopped off? I plan on running a shorter exhaust with a reverse megaphone, maybe.

      Pete if you're still lurking around I really love your exhaust, any tips on doing it?
      I'm not that flash with exhausts, but I do know the length of the headers is an important measurement for exhaust tuning. I think shorter encourages peak power lower in the rev range and longer is higher in the rev range, but by no means take my word for it as that's just what Google tells me.

      I had my exhaust professionally made by a local exhaust shop so I'm not sure how much info I can convey in that regard. All I know is I described how I wanted it to look and he got it spot on

      I have taken measurements for someone before though.

      Header pipe outer diameter:



      Right header length to collector (~900mm):



      Left header length to collector (~780mm):



      Outer diameter after collector into the muffler:



      Collector to muffler tip length (~720mm):



      I hope that helps...

      Oh, it's ceramic coated too which I love
      1982 GS450E - The Wee Beastie
      1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

      sigpic

      450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

      Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

      Comment


        #48
        Here are some more pictures. Pistons and combustion chamber are thick with carbon, other than that everything seems good but dirty.







        Comment


          #49
          Pete thanks for the pics, that exhaust is fantastic.

          Comment


            #50
            No worries mate, and yeah I have to agree

            The guy did an absolutely fantastic job on it and got it exactly how I wanted just with a verbal description... I left my cardboard mock up at home

            It also sounds quite sweet too
            1982 GS450E - The Wee Beastie
            1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

            sigpic

            450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

            Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

            Comment


              #51
              More Pics. Got the combustion chamber mostly cleaned out.





              Another one of the dirty pistons.



              Is there any way to easily clean out the exhaust ports because they are also caked with carbon.

              Other than that, do I need to use any type of gasket sealer for when I put it back together? I've heard of people using coppercoat. Hopefully the gaskets get here this week along with a few other odds and ends.

              Comment


                #52
                You don't need any gasket sealer just use the gaskets as they are.
                Cowboy Up or Quit. - Run Free Lou and Rest in Peace

                1981 GS550T - My First
                1981 GS550L - My Eldest Daughter's - Now Sold
                2007 GSF1250SA Bandit - My touring bike

                Sit tall in the saddle Hold your head up high
                Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
                and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"

                Comment


                  #53
                  Got a present in the mail.


                  That big box for those little bitty gaskets.

                  Comment


                    #54
                    Cool, Get to work

                    When you have the engine back together and filled with oil, rotate it by hand for about a hundred turns to seat the rings. It helps seat them and circulate the oil before the first start.

                    Did you get the block honed ?
                    Stephen.
                    1981 GSX540L "Frankintwin"
                    1989 GS500E Resto-mod .

                    400 mod thread
                    Photo's 1

                    Photos 2

                    Gs500 build thread
                    GS twin wiki

                    Comment


                      #55
                      So this weekend was bust. What little bit I wasn't working was spent fixing the wife's zj. I got it fixed and then promptly lost the keys.

                      Hopefully this week I'll be able to get the motor rebuilt. I did finally get everything I needed to finish it up in the mail so only thing holding me back is time.

                      I did have an issue I was hoping you guys could help with. I can't get the cylinder block off the crankcase. I've tried every sort of prying, pulling, banging, you name it and it is still holding on strong. I figured it would come off fairly easy like the top end, but no.

                      Well that's the update, sorry mekanix I'll try to get it done this week.

                      Comment


                        #56
                        There are two dowel pins in the back that align the block. They are provably what's holding it.

                        I've had luck hitting it with a rubber mallet. The other option is to put the head back on with only the front bolt . Push back and forrh and use the head as leverage to make the block separate.
                        Stephen.
                        1981 GSX540L "Frankintwin"
                        1989 GS500E Resto-mod .

                        400 mod thread
                        Photo's 1

                        Photos 2

                        Gs500 build thread
                        GS twin wiki

                        Comment


                          #57
                          So tonight I finally got the cylinders off the crankcase.

                          Mekanix thanks for the help, but it didn't work.

                          I ended up shoving the handle of my breaker bar into the hole where the cam chain tensioner was. Pulled with all my might and finally got it pulled off. Hopefully over the weekend I can get everything switched. I'll try to remember to take pictures as I go.

                          Comment


                            #58
                            Here are some pics I snapped while working.

                            The new cylinder and pistons on the left and the old on the right.
                            Its hard to tell that they are bigger, but they are.


                            New pistons installed.

                            Comment


                              #59
                              This is pretty cool. I'm anxious to see how everything works out!

                              Comment


                                #60
                                Good stuff... so is that the 500's cam chain tensioner on the back of the cylinders there? If so, it's tiny! Don't suppose that would work on the 450's?

                                I need to rip my starter out for a clean up but I'm not relishing the idea of taking the tensioner off first... looks like you could get the starter out and leave the tensioner there with the 500's one.
                                1982 GS450E - The Wee Beastie
                                1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

                                sigpic

                                450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

                                Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

                                Comment

                                Working...
                                X