Announcement
Collapse
No announcement yet.
What's this bit?
Collapse
X
-
What's this bit?
There is this sprung loaded knob of some sort on the back of the engine on my GS400. What is it and what's it used for? I've never seen such a thing on a combustion engine before. Some sort of vent or waste gate perhaps?
Tags: None
-
Cam chain tensioner.NO PIC THANKS TO FOTO BUCKET FOR BEING RIDICULOUS
Current Rides: 1980 Suzuki GS1000ET, 2009 Yamaha FZ1, 1983 Honda CB1100F, 2006 H-D Fatboy
Previous Rides: 1972 Yamaha DS7, 1977 Yamaha RD400D, '79 RD400F Daytona Special, '82 RD350LC, 1980 Suzuki GS1000E (sold that one), 1982 Honda CB900F, 1984 Kawasaki GPZ900R
-
brettule
-
gearhead13
Originally posted by brettule View PostCool, I can tension the cam chain from this thing? How?
Comment
-
sharpy
Here is a thought, go to Bass cliffs web pages and download a genuine workshop manual and read threw it PLEASE
Comment
-
brettule
Originally posted by sharpy View PostHere is a thought, go to Bass cliffs web pages and download a genuine workshop manual and read threw it PLEASE
Comment
-
Ask away old mate .
I'm sure Sharpy didn't mean to "get up ya" for not having a bit of a look around first (or maybe he did , you cranky old fart).
If you try the "search" bizzo and can't find what you need (I've tried a few times and it can be a bit of a challenge) , put something in your title to this effect (at least have a bit of a go though).
None of us were born with encyclopaedic GS knowledge and at some stage we all asked the "dumb" questions (I still do and probably will for a while yet) .
Cheers , Simon .http://i258.photobucket.com/albums/h...esMapSimon.jpg
'79 GS1000S my daily ride in Aus
'82 (x2) GS650ET in the shed
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35644
- Torrance, CA
Originally posted by brettule View PostSorry mate, I've got that manual, I've got the carby overhaul powerpoint pdf and I've got the lesser haynes manual too. I didn't know the name of the part though, and I didn't think it would offend if I cut a corner and instead of reading the manual until I recognised the part I'd just post a pic and got the story straight from you guys. Am I being too much of a noob? What's the baseline with TheGSResourses.com? Be blunt with me, I don't want to **** anyone off, this site is brilliant. Can I post my lazy nooby questions with the thought that the more threads here the greater the info and the better the site, or do I need to refrain from simple questions and RTFM before I waste forum space with such inane questions?Last edited by Nessism; 10-20-2013, 09:34 AM.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Actually he does have to mess with it to ensure that
1...its actually set correctly
2..the rod is moving and not jammed
Unless he has had the bike for a while he should not take anything for granted..ever. To be sure the tensioner is set right, loosen the 13MM jam nut and turn the slotted adjuster screw in till it touches and stops on the rod. Now back the screw out 1/4 turn and tighten the jam nut.
Be sure the big spring loaded knob actually moves. If its a little stuck just grip it with pliers and give it a turn. It rotates COUNTER CLOCKWISE ( to the left ) so dont try going to the right. Once the bike is back running you can EVER SO SLIGHTLY turn the knob and should feel the tensioner rod working.
If your rebuilding the engine, then take the tensioner off and clean / rebuild it and use a new gasket when replacing it on the engine. There are tensioner rebuild tutorials around somewhere. Try clicking on the mega welcome sticky at the top of the OWNERS forum section.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.
Comment
-
Inblues
Originally posted by chuck hahn View PostActually he does have to mess with it to ensure that
1...its actually set correctly
2..the rod is moving and not jammed
Unless he has had the bike for a while he should not take anything for granted..ever. To be sure the tensioner is set right, loosen the 13MM jam nut and turn the slotted adjuster screw in till it touches and stops on the rod. Now back the screw out 1/4 turn and tighten the jam nut.
Be sure the big spring loaded knob actually moves. If its a little stuck just grip it with pliers and give it a turn. It rotates COUNTER CLOCKWISE ( to the left ) so dont try going to the right. Once the bike is back running you can EVER SO SLIGHTLY turn the knob and should feel the tensioner rod working.
If your rebuilding the engine, then take the tensioner off and clean / rebuild it and use a new gasket when replacing it on the engine. There are tensioner rebuild tutorials around somewhere. Try clicking on the mega welcome sticky at the top of the OWNERS forum section.
Comment
Comment