Announcement

Collapse
No announcement yet.

Tappets

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Tappets

    Hi all, I need to adjust the tappets on my 82 GSX 400 T and am having difficulty setting the engine up on the right timing marks to start the adjustment. The Haynes manual is quite confusing, which is cylinder 1
    so I can find TDC and set the cams in the correct position to start with the adjustment sequence?

    Thanks in advance.

    #2
    As you sit on your bike, number one cylinder is on the left side. Wish I was more familiar with your model, but we didn't get those here. Ray
    "Nobody goes there anymore, it's too crowded" -Yogi Berra
    GS Valve Shim Club http://www.thegsresources.com/_forum...d.php?t=122394
    1978 GS1000EC Back home with DJ
    1979 GS1000SN The new hope
    1986 VFR700F2 Recycled

    Comment

    Working...
    X