Announcement

Collapse
No announcement yet.

replacing rings gs450

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    replacing rings gs450

    So I'm replacing my rings on my gs450. Anyways, tore it.down tonight, a.d just wondering.if there's anything holding the jugs to the cases, bolt wise or if its just a snug fit to get the cylinders off. Also, there's 2 bolts in the heads, they go in just outside the carb boots, 10mm heads. Anyone know what they are for??

    #2
    There are 4 10mm bolts on the carb side.... Two hold a small wedge shaped camshaft chain guide. The other two in my opinion... are either taps to see if there is oil getting to the cams, or a bolt to seal off a machining process for the oil galleys.

    Comment

    Working...
    X