Announcement
Collapse
No announcement yet.
Does one NEED to fix oil leaks?
Collapse
X
-
Originally posted by sam000lee View PostCowboy Up or Quit. - Run Free Lou and Rest in Peace
1981 GS550T - My First
1981 GS550L - My Eldest Daughter's - Now Sold
2007 GSF1250SA Bandit - My touring bike
Sit tall in the saddle Hold your head up high
Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"
-
Forum LongTimerCharter Member
GSResource Superstar
Past Site Supporter- May 2002
- 44506
- Brooksville Fl.
Originally posted by sam000lee View PostI meant the cover that the clutch pushrod is under. There's no gasket there, though - could the bit where the pushrod goes in be leaking?
On my 450L, under the counter shaft sprocket cover was the clutch pushrod and the foot gear shift shaft. There is a small round rubber doughnut that slides over the shifter shaft and presses into a recess and is the oil seal. Ten to 1, that is the source of your oil leak. A new doughnut will cost you about $3 and you can pick/pull/remove the old one with a hook and some small pliers. Press the new one in using a socket of appropriate size. Put a smear of oil on the new one before pressing it in.Komorebi-The light filtering through the trees.
I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.
Comment
-
FLHGSRay
[QUOTE000lee;2097392]Besides what everybody else said, who said I was a man?[/QUOTE]
I did actually look at your handle before I said "man up". I have 2 daughters so I'm sensitive to that sort of thing. When I saw sam, I assumed you were a man. No insult intended, and I apologize. Now, yes, you need to fix your oil leak. It probably won't hurt your engine, though, so do it at your leisure. Don't think you need to immediately park the bike.
Comment
-
Ok thanks all - got some good tips!1980/1981 GS450 - GS500 Cylinder + Piston Swap - "De-L'ed", custom seat, CB350 bits, 18" rear, etc.
1977 GS550
1977 GS750 - Cross country trip thread
Comment
-
since it is a girls bike maybe it just that time of the month and it will stop leaking in a weekMy stable
84 GSX1100EFG-10.62 @ 125 mph 64'' W/B.
85 GS1150-9.72@146mph stock W/B.
88 GSXR1100-dragbike 9.18@139.92mph/5.68@118mph.
98 Bandit 1200-9.38@146mph/6.02@121mph.
90 Suzuki GS 1425cc FBG Pro Stock chassis 5.42@124mph
06 GSXR750 10.44@135mph
00 Honda elite 80 pit bike
Comment
-
Found it with help from the footpowder trick! It's coming from the clutch pushrod which becomes quite apparent if you put a bit of paper towel against where it goes in:.
Thinking it could be #20 in this.Last edited by sam000lee; 08-11-2014, 03:59 PM.1980/1981 GS450 - GS500 Cylinder + Piston Swap - "De-L'ed", custom seat, CB350 bits, 18" rear, etc.
1977 GS550
1977 GS750 - Cross country trip thread
Comment
-
Originally posted by FLHGSRay View Post
I did actually look at your handle before I said "man up". I have 2 daughters so I'm sensitive to that sort of thing. When I saw sam, I assumed you were a man. No insult intended, and I apologize. Now, yes, you need to fix your oil leak. It probably won't hurt your engine, though, so do it at your leisure. Don't think you need to immediately park the bike.
I will say one thing though, if you're going to hang out in a place with such a male heavy population you're going to have to get used to hearing some crass comments now and then - st(re)etracer illustrates this point beautifully.Last edited by Allie; 08-11-2014, 06:07 PM."Men will never be free until Mark learns to do The Twist."
-Denis D'shaker
79 GS750N
Comment
-
Are #21-#29 part of the assembly that is on the cover where the clutch cable goes into? It almost looks as if I could replace the #20 part by removing the #22 cover from under the sprocket cover instead of having to remove the whole clutch.1980/1981 GS450 - GS500 Cylinder + Piston Swap - "De-L'ed", custom seat, CB350 bits, 18" rear, etc.
1977 GS550
1977 GS750 - Cross country trip thread
Comment
-
81GS850
You all seem to be getting bent out of shape on a comment that sounded to me like it was jokingly made.
You should fix the leak when you get the chance like it looks like you're doing. Although when I read the thread title I thought you were asking for acceptance to be lazy
Comment
-
.... if I were you, I would ride on until the weather turns. I think that drip is below the oil level and only leaks when you ride. Therefore, not crucial in my book. Of course, it needs doing but maybe not in the good weather..? Putting the bike on the centre stand might help the slow the drip.
Comment
-
Originally posted by Gorminrider View Post.... if I were you, I would ride on until the weather turns. I think that drip is below the oil level and only leaks when you ride. Therefore, not crucial in my book. Of course, it needs doing but maybe not in the good weather..? Putting the bike on the centre stand might help the slow the drip."Men will never be free until Mark learns to do The Twist."
-Denis D'shaker
79 GS750N
Comment
-
SVSooke
Comment
-
That is an excellent point. Ideally, a motorcycle saves gasoline and doesn't drip oil either.
...Just being facetious now, Does a bike with a drip that's mostly contained on cardboard (which can be burned as heating fuel) or recycled from a drip tray save enough contamination to justify the fuel it saves?
SV, your point reminds me; Does anyone else of a certain age think the center of the road is much cleaner nowadays with modern vehicles that aren't constantly dripping as the old cars seemed to?
Comment
-
winfield
Originally posted by Gorminrider View PostSV, your point reminds me; Does anyone else of a certain age think the center of the road is much cleaner nowadays with modern vehicles that aren't constantly dripping as the old cars seemed to?
Comment
Comment