GS400E (GSX400) resto 95% complete

[Guest]

Old and busted...


New Hotness



Still have to get that seat re-done to fit the lines of the bike and replace a few bolts...

Next near also new sh755 reg and a stevo stater going in.

[GS(X)400]

Im also looking for some engine guards to fit this bike anyone have anything or know of a supplier?

[eil]

Wow, what a great-looking twin. I want one!

[steve murdoch]

Your bike looks terrific.
These could probably be bought cheap and with a little polishing would turn out nice.
Just make sure to use the proper length mounting bolts. Lots of stories about damaged cases.

http://www.ebay.com/itm/1978-SUZUKI-GS400-GS400C-RIGHT-LEFT-ENGINE-GUARDS-OEM-/251265931642?pt=Motorcycles_Parts_Accessories&hash=item3a809dd97a&vxp=mtr

There is also a new set for $100.

[GS(X)400]

Your bike looks terrific.
These could probably be bought cheap and with a little polishing would turn out nice.
Just make sure to use the proper length mounting bolts. Lots of stories about damaged cases.

http://www.ebay.com/itm/1978-SUZUKI-GS400-GS400C-RIGHT-LEFT-ENGINE-GUARDS-OEM-/251265931642?pt=Motorcycles_Parts_Accessories&hash=item3a809dd97a&vxp=mtr

There is also a new set for $100.

Did the frames stay the same from 78 -8?. i know there isn't much difference

[Allie]

Man. That looks like fun for days on the back roads. Clean and sharp!

[BigD_83]

What pipe did you end up putting on it?

[GS(X)400]

Its an old Motad full exhaust!

So here is a question for you folks I need to replace the clutch plates as i'm getting some shuttering on engagement and not having much luck adjusting my clutch feel some i'm guessing i'm warped. I believe i remember reading that the GS500 are better and compatible. Can anyone confirm this?