Announcement

Collapse
No announcement yet.

Nut size?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Nut size?

    Anyone know what sized nut holds the drive sprocket on the shaft on an 81 GS 400L? I need to borrow some tools from work and I need to know what size to grab.

    #2
    You want to know the NUT size or the WRENCH size?


    Can't say for sure, as I have not worked on a 400 newer than '78, but most of the sprocket-holding nuts use a 32mm wrench.

    .
    sigpic
    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
    #2 son: 1980 GS1000G
    Family Portrait
    Siblings and Spouses
    Mom's first ride
    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
    (Click on my username in the upper-left corner for e-mail info.)

    Comment


      #3
      I need to know what size if tool I will need to get that nut loose. I'll go with that for now. If it doesn't fit, I'll just measure the nut so I know for later.

      Comment

      Working...
      X