Announcement

Collapse
No announcement yet.

Running but not really

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Went for my fist test ride today. Got it fully warmed up and set the idel. Was on the way back home and it started to idel high. Pulled over to check it out and everything looked fine. I cleaned the carbs and double checked the seals and slide boots. Not sure what it could be. Im letting it cool off and then I'll start it and check for leaks with carb cleaner.

    20160920_084621.jpg

    Comment


      #32
      Wanted to redo the electronics tray so I could fit the aftermarket regulator that's somewhat oversized. I also went over all of the wires that had been messed with before and removed all of the chopped up or badly connected parts and solder/ heat shrunk everything.
      I made sure to replace and add the extra grounds as advised in the "Noob" thread.

      14390922_540484702815472_550gggfd.jpg

      Comment

      Working...
      X