Any thoughts or similar experiences?
Announcement
Collapse
No announcement yet.
Clutch sticking/not releasing (meant for 4-stroke)
Collapse
X
-
Clutch sticking/not releasing (meant for 4-stroke)
The last time I rode my bike (after it had sat then shipped from OH to CA), I noticed it was hard to feel where the clutch was grabbing/releasing - it 'felt' like it was doing nothing, but pulling the clutch did let the RPM rise. Then, yesterday I went to move the bike in the garage and wasn't able to move it in gear with the clutch lever pulled; I had to put it in neutral.
Any thoughts or similar experiences?Last edited by Guest; 03-12-2017, 04:24 PM.Tags: None
-
Joe Garfield
Sure - although I was hoping someone would say "that happens, just ride it and it will get unstuck" I've got 3 vehicles and only 1 space in a garage so I need to be smart about what projects I take on at any given time.
Comment
-
Joe Garfield
I poured a bottle of stuff in the crank case and it seemed to help. I think it was called....uh....mmmmooooottttoooorrrrr oooooiiiiilllll.
Comment
-
Is this the new Gixxus? If it is the GS my 850 is always grabby after a long nap. "Just ride it and it will unstick itself" Really.sigpic
09 Kaw C14 Rocket powered Barcalounger
1983 GS1100e
82\83 1100e Frankenbike
1980 GS1260
Previous 65 Suzuki 80 Scrambler, 76 KZ900, 02 GSF1200S, 81 GS1100e, 80 GS850G
Comment
-
Joe Garfield
Originally posted by bobgroger View PostIs this the new Gixxus? If it is the GS my 850 is always grabby after a long nap. "Just ride it and it will unstick itself" Really.
Originally posted by bobgroger View PostIf it is the GS my 850 is always grabby after a long nap. "Just ride it and it will unstick itself" Really.
Comment
-
When was the last time you checked/lubricated the clutch cable?#1: 1979 GS 550 EC "Red" – Very first Bike / Overhaul thread New here? ☛ Read the Top 10 Newbie mistakes thread
#2: 1978 GS 550 EC "Blue" – Can't make it a donor / "Rebuild" thread Manuals (and much more): See Cliff's homepage here
#3: 2014 Moto Guzzi V7 II Racer – One needs a runner while wrenching
#4: 1980 Moto Guzzi V65C – Something to chill
Comment
-
Joe Garfield
Not long ago. The 'sticking' isn't in the lever, it's as nothing is really happening when I pull the lever. So far I've only played with it on the center stand, but I had no problem shifting in and out of gear, finding the friction zone, etc. It will be a while before I can road test it as I'm about to tear top end apart. I guess that's not a bad time to open the clutch cover and take a look, just to see how things look.
Comment
-
Alright, interested in what you'll find.
Reason I was asking is because the described symptoms matched mine shortly before the (PO-bogde'd) clutch cable gave out.#1: 1979 GS 550 EC "Red" – Very first Bike / Overhaul thread New here? ☛ Read the Top 10 Newbie mistakes thread
#2: 1978 GS 550 EC "Blue" – Can't make it a donor / "Rebuild" thread Manuals (and much more): See Cliff's homepage here
#3: 2014 Moto Guzzi V7 II Racer – One needs a runner while wrenching
#4: 1980 Moto Guzzi V65C – Something to chill
Comment
-
Joe Garfield
Oh, like maybe the cable stretched and didn't disengage the clutch all the way... I'll let you know what I find. It could still be acting up and I don't realize it because it's on the stand. But, it did take a lot of oil, so we'll see...
Comment
-
jacksonator
hi I have similar problem with my gs850 with my clutch sticking brand new clutch fitted what could be the problem with it sticking please
Comment
Comment