Announcement
Collapse
No announcement yet.
GS750T shorter clutch cable
Collapse
X
-
GS750T shorter clutch cable
I am looking for a shorter clutch cable as I got new bars. The current one is 52 inches. New one needs to be around 48-46 inches and fit to a 16v TSCC engine. Is there a specific model that has a short enough cable or can Motion Pro make them to specific lengths? Is it possible to trim the handlebar side of the cable and put on a new fitting?---------------------------------------------------------------------------------------------------
Bikes:
2016 Suzuki TU250X (Daily/Commuter)
1982 Suzuki GS750T (Project)
1979 Suzuki GS750 (in pieces)
Cage:
2005 Subaru WRX Wagon sh*t boxTags: None
-
Were the OEM bars on the T a fairly high set?
If so, the Euro version was likely supplied with a lower set and a shorter clutch cable, just like the 850s were.
I'd hesitate to recommend a particular cable, as I don't know if it would even fit your engine, when routing and bottom clevis end / adjuster are taken into account.---- Dave
Only a dog knows why a motorcyclist sticks his head out of a car window
-
Yeah they were pretty high. It routes through along the frame, through the carb boots on cylinder 1 and 2, and then ends on the right side of the engine.---------------------------------------------------------------------------------------------------
Bikes:
2016 Suzuki TU250X (Daily/Commuter)
1982 Suzuki GS750T (Project)
1979 Suzuki GS750 (in pieces)
Cage:
2005 Subaru WRX Wagon sh*t box
Comment
-
Forum GuruPast Site Supporter
Super Site Supporter- Jun 2018
- 5618
- Mifflinburg, PA / Land of Tar & Chip
You might be able to use the Same clutch cable, with just a little more hoop toward the front of the bike. Same issue with the choke cable, throttle cable and hydraulic brake line. My red line probably a bit exaggerated.
Last edited by Rich82GS750TZ; 04-12-2022, 10:49 PM.Rich
1982 GS 750TZ
2015 Triumph Tiger 1200
BikeCliff's / Charging System Sorted / Posting Pics
Destroy-Rebuild 750T/ Destroy-Rebuild part deux
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13994
- London, UK to Redondo Beach, California
The shortest clutch cable of the stock bikes is the one for the GS1000S model if yours is not the pushrod type....1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
Comment
-
Just an update for future reference:
Motion Pro 45 1/4 in. Clutch Cable - 04-0151
This is the one I actually went with. I'm using super sport bars.
Parts Unlimited 43 3/4 in. Clutch Cable - K280027
This one was too short but may be useful to someone running even lower bars/clip-ons.
---------------------------------------------------------------------------------------------------
Bikes:
2016 Suzuki TU250X (Daily/Commuter)
1982 Suzuki GS750T (Project)
1979 Suzuki GS750 (in pieces)
Cage:
2005 Subaru WRX Wagon sh*t box
Comment
Comment